Smartphones change people's habits and make people enjoy the convenience of touch solutions. Winstar's vision is to devote itself to the human-machine interaction interface and communication technology innovation. Touch panels can be divided into resistive touch panels (RTP) and capacitive touch panels (CTP) based on electrical principles...

HDMI Series is plug and play device. There are two IC transfers display and touch signal to master device. For touch panel, there are Mouse Mode (default) and Touch Pad Mode. And capacitive touch panel can update the firmware through USB port. It can work with Windows and Raspbian operating system...

Comparison table between MCU TFTs with Solomon IC SSD1963 vs RAiO IC RA8875. Power supply / MCU interface / Graphics / BTE / Double layer / Character fonts / Keyboard / Touch management / DMA...

Buttons in the past, touch panels today; in the past CRT, and LCD today are bright and dazzling self-emitting OLED, no electronic radiation, no backlight; a green and environmentally friendly communication technology - TP OLED...

This article declares how to use a SmartDisplay CANBUS 4.3" module in displaying 240-degree Gauge received from a host controller. The host is Arduino mega 2560 board with CANBUS shield and Rotary Angle Sensor. Required components are shown below: 1.SmartDisplay CANBUS 4.3" 2.ARDUINO Mega 2560 3.CAN-Bus Shield 4.Rotary Angle Sensor 5.CANBus Dongle 6.Software GUI-Builder...

EOL Notice: Solomon ICs SSD1307ZD & SSD1311 Phase Out. OLED families involved: WEO012832G series / WEA012832G series (1.71”) / WEO001602C series / WEP001602C series (2.26”) /WEO001602G serie (2.26”) / WEO002002A series / WEP002002A series (2.93”) / WEO002004C serie / WEA002004C series / WEP002004C series (2.89”)...

Solomon announced the EOL of STN LCD IC SSD1839BZ, SSD1838BZ, SSD1839BUR, SSD1848CZ, SSD1808BZ, SSD1803AM1Z, SSD1848AZ and SSD1803AM4Z. COG LCD WO2004-xxxA#FC Family Involved...

FIRST Components provides thousands of model display modules, including TN/STN LCD, OLED, and TFT. And there are many types of interfaces to deliver image data to the display module. Customers may question which one is the best or can meet the requirement. This article will discuss an issue regarding the data transfer of display interfaces.

FIRST Components continues to provide customers with a comprehensive solution service, and actively launched our Smart Display Series products accordingly. The first CAN series Smart Display launched is based on this as a starting point. What is CAN Bus? How it works? What kinds of advantage can it bring to users? Let’s read more information in the following.

STN Avant IC SBN1661G-M18-D with wafer production capacity shortage. Winstar is testing and planning to adapt to alternative IC AiP31520 for further production units.