Search
English
All Categories
    Menu Close

    WEP12864W#UP3D00000-FC

    PMOLED 2.7" Graphic 128x64, White color, COG + PCB + Frame, 3V, Interface 6800,8080,SPI,I2C, Glare, Gray scale function, Capacitive touch panel I2C (IC GT911)
    Manufacturer: Winstar
    SKU: WEP12864W#UP3D00000-FC

    Accessory kit

    PRICE BREAKS
    Quantity
    1+
    5+
    10+
    Price
    €54.60
    €49.20
    €46.20

    For quantities above 24pcs pls send your enquiry to [email protected] or call +39 0332 1888005

    Availability: The product can not be added to the cart. Please check with FC for future availability
    €54.60 excl tax
    i h

    DRAWING

     

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 VSS This is a ground pin.
    2 VDD Power supply pin for core logic operation
    3 NC Reserved Pin
    The N.C. pin between function pins is reserved for compatible and flexible design.
    4 D/C# This pin is Data/Command control pin connecting to the MCU.
    When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
    When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
    In I2C mode, this pin acts as SA0 for slave address selection.
    When 3-wire serial interface is selected, this pin must be connected to VSS.
    5 R/W#
    (WR#)
    This pin is read / write control input pin connecting to the MCU interface.
    When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
    When 8080 interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled LOW and the chip is selected.
    When serial or I2C interface is selected, this pin must be connected to VSS.
    6 E/RD# This pin is MCU interface input.
    When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
    Read/write operation is initiated when this pin is pulled HIGH and the chip is selected.
    When 8080 interface mode is selected, this pin receives the Read (RD#) signal. Read operation is initiated when this pin is pulled LOW and the chip is selected.
    When serial or I2C interface is selected, this pin must be connected to VSS.
    7 DB0 These pins are bi-directional data bus connecting to the MCU data bus.
    Unused pins are recommended to tie LOW.
    When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
    When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
    8 DB1
    9 DB2
    10 DB3
    11 DB4
    12 DB5
    13 DB6
    14 DB7
    15 NC No connection
    16 RES# This pin is reset signal input.
    When the pin is pulled LOW, initialization of the chip is executed.
    Keep this pin pull HIGH during normal operation.
    17 CS# Chip Select
    This pin is the chip select input. The chip is enabled for MCU communication only when CS# is pulled low.
    18 NC No connection
    19 BS2 Communicating Protocol Select.
    These pins are MCU interface selection input. See the following table:
      BS1 BS2
    I2C 1 0
    4-wire Serial 0 0
    8-bit 8080 Parallel 1 1
    8-bit 6800 Parallel 0 1
    20 BS1
    21 TP_SCK I2C clock signal
    22 TP_SDA I2C data signal
    23 TP_INT Interrupt signal, active low, asserted to request
    Host start a new transaction
    24 TP_RST External reset signal, active low

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 128 x 64 -
    Module dimension 82.0 × 47.5 × 8.65 Max. mm
    Active Area 61.41 × 30.69 mm
    Pixel Size 0.45 × 0.45 mm
    Pixel Pitch 0.48 × 0.48 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/64 Duty
    Gray Scale 4 bits
    IC SSD1357
    Interface 8-bits 6800 and 8080 parallel, 4-line SPI, I2C
    Size 2.7 inch
     
    CTP IC GT911
    Detect Point 1
    CTP Interface I2C
    Surface Normal Glare

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VDD -0.3 4.0 V
    Operating Temperature TOP -20 +70 °C
    Storage Temperature TSTG -30 +80 °C
     

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD - 2.8 3.0 3.3 V
    High Level Input VIH - 0.8×VDD - - V
    Low Level Input VIL - - - 0.2×VDD V
    High Level Output VOH - 0.9×VDD - - V
    Low Level Output VOL - - - 0.1×VDD V
    50% Check Board operating Current IDD VDD =3V - 160 240 mA


    Products specifications
    Size 2.7"
    Resolution 128x64
    Active Area (mm) 61.41x30.69
    Dot Size 0.45x0.45
    Polarizer Glare
    Color White
    Power supply 3V
    Display Interface 6800/8080/SPI/I2C
    Display IC SSD1357
    Constructive Structure COG + PCB
    Frame Yes
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection Soldering PAD
    Pin Nr. 24
    Pin Pitch 2.54mm
    Touch Panel IC Controller GT911
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Only registered users can write reviews