Search
Filters
Close

Touch Panel OLED Display: External / In-cell Touch Solutions!

Touch Panel OLED Display: External / In-cell Touch Solutions!

 OLED External Touch Panel Solution: touch panel module assembled to an existing OLED panel. Advantages: no need to change the OLED panel design and manufacturing process; costs saving; applicable design to every existing sizes...
 OLED In-cell Touch Panel Solution: driver IC called TDDI (Touch with Display Driver IC) built-in with the touch circuit design and the display circuit design. Advantages: lightness; thinness; costs saving. The simple design structure helps simplify the circuit design and shorten the development process...

More information HERE.

 
 
 

☛ 1.54'' 128x64 COG OLED Display with External Capacitive Touch Panel. This module is built-in with SSD1309 IC: 6800/8080 8-bit parallel, 4-wire SPI, and I2C interface. CTP touch panel with Air Bonding process (Optical Bonding process also available). CTP is built-in with FT6336U IC: I2C interface with one detect point.

 
- Module dimension: 43.04x 28.22x 3.01mm
- Active Area: 35.05x 17.51mm
- Display Color: Monochrome
- Display IC: SSD1309
- Interface: 6800,8080,4-wire SPI,I2C
- CTP IC: FT6336U
- CTP Interface: I2C
- Detect Point: 1
- P/N WEO12864W#AP3D00001-FC
 
 

☛ 0.91” 128x64 COG OLED Display with In-cell Capacitive Touch Panel. This module is built-in with SSD7317 TDDI IC (Touch with Display Driver IC): 4-Wire SPI and I2C interface. SSD7317 IC integrates touch and display microelectronics into a single chip: four touch keys (areas) and one direction slide (right/left direction).

 
- Module dimension: 30.0x 1.5x 1.41mm
- Active Area: 22.38x 5.58mm
- Display Color: Monochrome
- Display IC: SSD7317
- Display Interface: 4-wire SPI,I2C
- CTP Interface: SPI,I2C
- Gesture: 4-key and 1-Direction slide
- P/N WEO012832W#MAP3J00000-FC
 

NEW Entries OLED (no touch)

 

 0.69'' 96x16 Micro Consumer-grade COG OLED Display. This module is built-in with SSD1306 IC: I2C interface. Ultra-thin, lightweight, and low power consumption: it is very suitable for smart home applications, medical devices, portable devices, wearable devices.

- Module dimension: 26.3x 8.0x 1.26mm
- Active Area: 17.26x 3.18mm
- Display Color: Monochrome
- Display IC: SSD1306
- Display Interface: I2C
- P/N WEO9616W#BPP3N0Y000-FC
 
 
 

☛ 0.96'' 64x128 COG + PCB Board OLED Display. This module is built-in with SH1107 IC: I2C interface. PCB board with four Mounting Holes and Metal Pins for an easy fixting and piloting. The booster circuit has been designed on the PCB version, and the customer only needs to provide a set of VDD voltage to use.

- Module dimension: 34.0x 18.0x 1.41mm
- Active Area: 10.86x 21.74 mm
- Display Color: Monochrome
- Display IC: SH1107
- Display Interface: I2C
- P/N WEA64128W#AP3N0Y000-FC

 

 

☛ 1.12'' 128x128 Square COG OLED Display. This module is built-in with SH1107 IC: 6800/8080 8-bit parallel, 4-Wire SPI, I2C interface. COG structure with Hot-bar soldering FPC: lightweight, low power, and very thin. It is suitable for meter devices, home applications, handheld instruments, intelligent technology devices, communication systems, etc. 

- Module dimension: 25.9x 30.1x 1.26mm
- Active Area: 20.07x 20.07mm
- Display Color: Monochrome
- Display IC: SH1107
- Display Interface: 6800,8080,4-Wire SPI,I2C
- P/N WEO128128W#GAP3N00000-FC
 
 
 
 

☛ 1.23'' 16x2 Character COG OLED Display. It is built-in with WS0012 IC: 6800/8080 8-bit parallel, I2C, 4-wire SPI interface. Advantages: fast response time "At +25 ℃ 10 μsec, unlimited viewing angle up to 175 degree, high brightness & contrast ratio, low-power consumption, wide operating temperature.

​​​​​​​- Module dimension: 39.1x 15.8x 2.01mm
- Active Area: 30.69x 5.94 mm
- Display Color: Monochrome
- Display IC: WS0012
- Display Interface: 6800, 8080, SPI, I2C
- P/N WEO1602W#HPP3N00000-FC
 
 
 

For more information contact us @ marketing@first-components.com

;