Cerca
Italiano
Catalogo
    Menu Chiudi

    WEP12832L#NP3N00000-FC

    PMOLED 2.23" Graphic 128x32, Yellow color, COG + PCB + FR, 3.3V, Interface 6800,8080,SPI,I2C, Glare (SH1106)
    Brand: Winstar
    Cod.: WEP12832L#NP3N00000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €18,30
    €16,40
    €15,50
    €15,10

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €18,30 IVA esclusa
    i h

    DRAWING

     6800 / 8080 /SPI / I2C 20x4 OLED Display -  WEO002004C Drawing

    SPECIFICATIONS

    Mechanical Data

    Item

    Dimension

    Unit

    Dot Matrix

    128 x 32 Dots

    -

    Module dimension

    66.5 × 35.0 × 9 Max.

    mm

    Active Area

    55.016 × 13.096

    mm

    Pixel Size

    0.406 × 0.386

    mm

    Pixel Pitch

    0.43 × 0.41

    mm

    Display Mode

    Passive Matrix

    Display Color

    Yellow

    Drive Duty

    1/32 Duty

    IC

    SH1106

    Interface

    6800,8080,4-Wire SPI,I2C

    Size

    2.23 inch

     

    Interface Pin Function

    No.

    Symbol

    Function

    1

    VSS

    Ground.

    2

    VDD

    Power supply input.

    3

    NC

    No connection.

     

     

    4

     

     

    D/C#

    This is the Data/Command control pad that determines whether the data bits are data or a command.

    D/C = “H”: the inputs at DB0 to DB7 are treated as display data.

    D/C = “L”: the inputs at DB0 to DB7 are transferred to the command registers. In I2C interface, this pad serves as SA0 to distinguish the different address of OLED driver.

     

     

     

    5

     

     

     

    R/W#

    This is a MPU interface input pad.

    When connected to an 8080 MPU, this is active LOW. This pad connects to the 8080 MPU WR signal. The signals on the data bus are latched at the rising edge of the WR signal.

    When connected to a 6800 Series MPU: This is the read/write control signal input terminal.

    When R/W = “H”: Read.

    When R/W = “L”: Write.

     

     

     

    6

     

     

     

    E/RD#

    This is a MPU interface input pad.

    When connected to an 8080 series MPU, it is active LOW. This pad is connected to the RD signal of the 8080 series MPU, and the data bus is in an output status when this signal is “L”.

    When connected to a 6800 series MPU, this is active HIGH. This is used as an enable clock input of the 6800 series MPU.

    When RD = “H”: Enable.

    When RD = “L”: Disable.

     

     

     

    7~14

     

     

     

    DB0~DB7

    This is an 8-bit bi-directional data bus that connects to an 8-bit or 16-bit standard MPU data bus.

    When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI). At this time, D2 to D7 are set to high impedance.

    When the I2C interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SDAI). At this time, D2 to D7

    are set to high impedance.

    15

    CS#

    This pad is the chip select input. When CS = “L”, then the chip select becomes active, and data/command I/O is enabled.

    16

    RES#

    This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.

    17

    BS1

    These are the MPU interface mode select pads.

     

    68XX-parallel

    80XX-parallel

    Serial

    I2C

     

    18

    BS2

    BS1

    0

    1

    0

    1

    BS2

    1

    1

    0

    0

    19

    NC

    No connection.

    20

    FG

    Ground.

    21~25

    NC

    No connection.

    26

    VSS

    Ground.

    27~28

    NC

    No connection.

     

    Absolute Maximum Ratings

    Parameter

    Symbol

    Min

    Max

    Unit

    Notes

    Supply Voltage For Logic

    VDD-VSS

    -0.3

    3.6

    V

    1,2

    Operating Temperature

    TOP

    -40

    +80

    °C

    -

    Storage Temperature

    TSTG

    -40

    +85

    °C

    -

     

    Electrical Characteristics

    DC Electrical Characteristics

    Item

    Symbol

    Condition

    Min

    Typ

    Max

    Unit

    Supply Voltage for Logic

    VDD

    -

    2.9

    3.3

    3.5

    V

    Input High Volt.

    VIH

    -

    0.8XVDD

    -

    VDD

    V

    Input Low Volt.

    VIL

    -

    VSS

    -

    0.2xVDD

    V

    Output High Volt.

    VOH

    -

    0.8xVDD

    -

    VDD

    V

    Output Low Volt.

    VOL

    -

    VSS

    -

    0.2xVDD

    V

    Display 50% Pixel On

    IDD

    VDD=3.3V

    -

    30

    45

    mA

     

    Specifiche di prodotto
    Size 2.23"
    Resolution 128x32
    Active Area (mm) 55.01x13.09
    Dot Size 0.41x0.39
    Polarizer Glare
    Color Yellow
    Power supply 3.3V
    Display Interface 6800/8080/SPI/I2C
    Display IC SH1106
    Constructive Structure COG + PCB
    Frame Yes
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection Soldering PAD
    Pin Nr. 28
    Pin Pitch 2.54mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni