Cerca
Italiano
Catalogo
    Menu Chiudi

    WEN25664W#DP3N00000-FC

    PMOLED 5.5" Graphic 256x64, White color, COF + PCB, 3V, Interface 6800,8080,SPI, Glare
    Brand: Winstar
    Cod.: WEN25664W#DP3N00000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €61,50
    €55,40
    €52,10

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €61,50 IVA esclusa
    i h

    DESCRIPTION

    The WEN25664W#DP3N00000-FC COF OLED display module, which includes a frame and PCB, features a resolution of 256x64 dots and a 5.5-inch diagonal module dimension (135.65 × 33.89 mm). Equipped with a built-in SSD1322 IC supporting 6800/8080 8-bit and 3/4-line SPI interfaces, this module operates on a 3V power supply, utilizing a 1/64 duty driving method and supporting 4-bit grayscale with an impressive contrast ratio of 10000:1.

    The WEN25664W#DP3N00000-FC comes with a PCB board featuring a frame, facilitating convenient connectivity to applications via wires. Customers are spared the task of developing additional PCB boards, as the module integrates interface settings and VDD circuits for user-friendly operation. The PCB also includes four screw holes, streamlining the installation onto application products. With an operational temperature range of -40℃ to +80℃ and a storage temperature range of -40℃ to +85℃, this OLED module is well-suited for diverse environments.

    This 5.5-inch OLED module is particularly suitable for applications such as POS systems and vending machines.

     

    DRAWING

     

    SPECIFICATIONS

    Interface Pin Function

    Pin
    Number
    SymbolI/OFunction
    1 VSS P Ground.
    2 VDD P Power Supply for Core Logic Circuit
    Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS
    3 N.C. P Reserved Pin
    The N.C. pin between function pins are reserved for compatible and flexible design.
    4 D/C# I Data/Command Control
    This pin is Data/Command control pin connecting to the MCU.
    When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
    When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.
    5 R/W#
    (WR#)
    I Read/Write Select or Write
    This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
    When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
    When serial mode is selected, this pin must be connected to VSS.
    6 E(/RD#) I Read/Write Enable or Read
    This pin is MCU interface input.
    When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
    When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
    When serial mode is selected, this pin must be connected to VSS.
    7~14 DB0 I/O Host Data Input/Output Bus
    These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
    When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
    DB1
    DB2
    DB3
    DB4
    DB5
    DB6
    DB7
    15 NC P Reserved Pin
    The N.C. pin between function pins are reserved for compatible and flexible design.
    16 RES# I This pin is reset signal input.
    When the pin is pulled LOW, initialization of the chip is executed.
    Keep this pin pull HIGH during normal operation.
    17 CS# I Data/Command Control
    This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.
    18 NC P Reserved Pin
    The N.C. pin between function pins are reserved for compatible and flexible design.
    19 BS1 I Communicating Protocol Select
    These pins are MCU interface selection input. See the following table:
    BS[1:0] Bus Interface Selection
    00 4 line SPI
    01 3 line SPI
    10 8-bit 8080 parallel
    11 8-bit 6800 parallel
    Note
    (1) 0 is connected to VSS
    (2) 1 is connected to VDD
    20 BS0
    21 NC - No connection
    22 NC - No connection
    23 NC - No connection
    24 NC - No connection

     

    General Specification

    ItemDimensionUnit
    Dot Matrix 256 × 64 Dots -
    Module dimension 147.0 × 59 × 2.5 mm
    Active Area 135.65 × 33.89 mm
    Pixel Size 0.50 × 0.50 mm
    Pixel Pitch 0.53 × 0.53 mm
    Display Mode Passive Matrix
    Display Color White
    Drive Duty 1/64 Duty
    Gray scale 4 bits
    IC SSD1322
    Interface 6800, 8080, SPI
    Size 5.5 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Display VDD -0.3 4 V
    Operating Temperature TOP -40 +80 °C
    Storage Temperature TSTG -40 +85 °C

     

    Electronical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD - 2.8 3.0 3.3 V
    High Level Input VIH - 0.8×VDD - VDD V
    Low Level Input VIL - 0 - 0.2×VDD V
    High Level Output VOH - 0.9×VDD - VDD V
    Low Level Output VOL - 0 - 0.1×VDD V
    Display 50% Pixel on IDD VDD =3V - 240 400 mA

     

    Specifiche di prodotto
    Size 5.5"
    Resolution 256x64
    Active Area (mm) 135.65x33.89
    Dot Size 0.50x0.50
    Polarizer Glare
    Color White
    Power supply 3V
    Display Interface 6800/8080/SPI
    Display IC SSD1322
    Constructive Structure COF + PCB
    Frame Yes
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection Soldering PAD
    Pin Nr. 24
    Pin Pitch 2.54mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni