Cerca
Italiano
Catalogo
    Menu Chiudi

    WEN25664W#DP3D00000-FC

    PMOLED 5.5" Graphic 256x64, White color, COF + PCB, 3V, Interface 6800,8080,SPI, Glare, Capacitive touch panel I2C (IC GT911)
    Brand: Winstar
    Cod.: WEN25664W#DP3D00000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €78,10
    €70,30
    €66,10

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €78,10 IVA esclusa
    i h

    DESCRIPTION

    WEN25664W#DP3D00000-FC is an industrial grade 5.5-inch COF Graphic OLED with frame bezel, PCB and Capacitive Touchscreen, made of resolution 256x64 dots. This OLED module is built-in with SSD1322 IC; it supports 6800/8080 8-bit parallel, and 3-wire/4-wire SPI interface, supports 16 (4-bit) gray scale, supply voltage for logic 3V, the display current with 50% checkerboard is 240mA @3.0V VDD (typical value), 1/64 driving duty. This model is having Capacitive Touchscreen on module; it is built-in with GT911 IC which supports I2C interface, one detect point for CTP, normal glare surface glass.

    The module is having PCB on module which is suitable for customers to use wire connection; customers do not need to develop extra PCB for their applications. Also, we integrated VCC circuit on PCB to make it easier for customers to use. This module is also supporting many wiring methods like PIN, FFC, CN, FPC. There are four mounting holes on PCB board which is an easy method for customers to fix modules on their applications.

    This OLED module is suitable for smart home application, medical device, industrial control, etc. WEN25664W#DP3D00000-FC can be operating at temperatures from -20°C to +70°C; its storage temperatures range from -30°C to +80°C.

    This 5.5-inch OLED module is particularly suitable for applications such as POS systems and vending machines.

     

    DRAWING

     

    SPECIFICATIONS

    Interface Pin Function

    Pin NumberSymbolI/OFunction
    1 VSS P Ground.
    2 VDD P Power Supply for Core Logic Circuit
    Power supply pin for core logic operation. A capacitor is required to connect between this pin and VSS
    3 N.C. P Reserved Pin
    The N.C. pin between function pins are reserved for compatible and flexible design.
    4 D/C# I Data/Command Control
    This pin is Data/Command control pin connecting to the MCU.
    When the pin is pulled HIGH, the content at D[7:0] will be interpreted as data.
    When the pin is pulled LOW, the content at D[7:0] will be interpreted as command.
    5 R/W#
    (WR#)
    I Read/Write Select or Write
    This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input. Pull this pin to “High” for read mode and pull it to “Low” for write mode.
    When 80XX interface mode is selected, this pin will be the Write (WR#) input. Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
    When serial mode is selected, this pin must be connected to VSS.
    6 E/RD# I Read/Write Enable or Read
    This pin is MCU interface input. When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
    When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
    When serial mode is selected, this pin must be connected to VSS.
    7~14 DB0 I/O Host Data Input/Output Bus
    These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
    When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
    DB1
    DB2
    DB3
    DB4
    DB5
    DB6
    DB7
    15 NC P Reserved Pin
    The N.C. pin between function pins are reserved for compatible and flexible design.
    16 RES# I This pin is reset signal input.
    When the pin is pulled LOW, initialization of the chip is executed.
    Keep this pin pull HIGH during normal operation.
    17 CS# I Data/Command Control
    This pin is the chip select input connecting to the MCU. The chip is enabled for MCU communication only when CS# is pulled LOW.
    18 NC P Reserved Pin
    The N.C. pin between function pins are reserved for compatible and flexible design.
    19 BS1 I Communicating Protocol Select
    These pins are MCU interface selection input. See the following table:
    BS[1:0]Bus Interface Selection
    00 4 line SPI
    01 3 line SPI
    10 8-bit 8080 parallel
    11 8-bit 6800 parallel
    Note
    (1) 0 is connected to VSS
    (2) 1 is connected to VDD
    20 BS0
    21 TP_SCK I I2C clock input
    22 TP_SDA I I2C data input and output
    23 TP_INT I External interrupt to the host
    24 TP_RST I External Reset, Low is active

     

    General Specification

    ItemDimensionUnit
    Dot Matrix 256 × 64 Dots -
    Module dimension 147.0 × 59 × 4.8 mm
    Active Area 135.65 × 33.89 mm
    Pixel Size 0.5 × 0.5 mm
    Pixel Pitch 0.53 × 0.53 mm
    Display Mode Passive Matrix
    Display Color White
    Drive Duty 1/64 Duty
    Gray Scale 4 bits
    OLED IC SSD1322
    OLED Interface 6800, 8080, SPI
    Size 5.5 inch
     
    CTP IC GT911
    Detect Point 1
    CTP Interface I2C
    Surface Normal Glare

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Display VDD -0.3 4 V
    Operating Temperature TOP -20 +70 °C
    Storage Temperature TSTG -30 +80 °C

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD - 2.8 3.0 3.3 V
    High Level Input VIH - 0.8×VDD - VDD V
    Low Level Input VIL - 0 - 0.2×VDD V
    High Level Output VOH - 0.9×VDD - VDD V
    Low Level Output VOL - 0 - 0.1×VDD V
    50% Check Board operating Current IDD VDD =3V - 240 400 mA

    Specifiche di prodotto
    Size 5.5"
    Resolution 256x64
    Active Area (mm) 135.65x33.89
    Dot Size 0.50x0.50
    Polarizer Glare
    Color White
    Power supply 3V
    Display Interface 6800/8080/SPI
    Display IC SSD1322
    Constructive Structure COF + PCB
    Frame Yes
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection Soldering PAD
    Pin Nr. 24
    Pin Pitch 2.54mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni