Cerca
Italiano
Catalogo
    Menu Chiudi
    Eval Kit for TFT 7" 1024x600, CAN Bus interface CANopen, High brightness 850cd/m², Wide View Angle (IPS), Capacitive touch panel (GG)
    Brand: Winstar
    Cod.: WWSSDEMO70A8-AA-13#

    Kit accessori

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €189,20 IVA esclusa
    i h

    DESCRIPTION

        Link to 'SMART GUI BLIDER' INTRODUCTION & VIDEO

    WL0F0007000A8GAAASx01-FC is a 7" Smart Display_CAN series TFT which is defined as a slave device, that is controlled by master device via CAN bus command to render display content on the display screen and return touch event data with protocol objects. WL0F0007000A8GAAASx01-FC is integrated with a high brightness IPS TFT module WF70-1024600A8L#BSP3-FC and 4-layers PCBA with built-in firmware. This 7" Smart Display _CAN series TFT is an easy-to-use product which allows customers to develop projects rapidly in cost-effective way. This 7" Smart Display can use computer with USB2CAN dongle or Raspberry Pi interface (PiCAN2) as HOST platform.

    We have three demo scenario as below:
    WL0F0007000A8GAAASB01-FC (Industrial Application)
    WL0F0007000A8GAAASC01-FC (Vehicle Application)
    WL0F0007000A8GAAASD01-FC (Medical Application)

    Below are the features of 7" smart display:

    • +12V power supply input.
    • Power-On Self-Test & Splash screen.
    • CAN bus communication interface.
    • Supports CANopen protocol, default baud rate at 250KB.
    • Built in flash memory, storing the font and Object Dictionary Data.
    • Supports projected capacitive touch screen (PCAP).
    • Smart Display scenario is slave device display and action from Master Device instruction.
    • Embedded buzzer controlled by Master Device.
    • Demo set HOST can be used on multiple platforms, such as Computer (with USB to CAN Dongle), MCU, Raspberry Pi (with PiCAN2).
    • Design the UI without writing a line of code by winstar GUI builder!
     

    Winstar Smart Display CAN Series offers an out-of-the-box CANopen development experience that will lower your development costs and speed your time-to-market expectations. The CanTFT comes with standard UI objects to get customers project off the ground quickly. If customers need custom UI objects support, our engineers are here to help. Send over your contents in PNG/JPG format, we will customize a new set of UI objects to you.

     

    DRAWING

     

    Bom

    ItemDescription
    LCM WF70-1024600A8L#BSP3-FC
    PCBA Design part for SMART070

     

    SPECIFICATIONS

    General Specifications

    Mechanical Data

    ItemStandard ValueUnit
    LCD panel 169.9(W) x 103.4(H) x 7.3(D) mm
    PCB 184.1(W) x 102.6(H) x 1.6(D) mm
    Housing outline 184.1(W) x 103.8(H) x 21.85(D) mm
     

     

    General information

    ItemStandard ValueUnit
    Operating voltage 12 Vdc
    Communication Interface CAN bus differential ± 3.3 Vpp
    Size 7.0 inch
    Dot Matrix 1024 x RGB x 600(TFT) dot
    Module dimension 169.9(W) x 103.4(H) x 7.3(D) mm
    Active area 154.2144 x 85.92 mm
    Dot pitch 0.1506 x 0.1432 mm
    Backlight Type LED, Normally Black, Transmissive
    Viewing Angle 85/85/85/85
    Aspect Ratio 16:9
    With /Without TP With Projected Capacitive Touch Panel (PCAP)
    Surface Glare
     

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -20 - +70 ℃
    Storage Temperature TST -30 - +80 ℃

     


    Electrical Characteristics

    Operating conditions:

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage For Analog VCI - 11.4 12 12.6 V
    Interface Operation Voltage IOVCC - 3.234 3.30 3.367 V
    Supply LCM current ICI(mA) - - 675 - mA

     

    Interface Pin Function

    CON2 definition

    PinSymbolFunctionRemark
    1 +12V Power supply 12V input Input
    2 GND Power supply GND input Input
    3 CAN_High CAN bus D+ I/O
    4 CAN_Low CAN bus D- I/O
    5   GND Power supply GND input Input
    6 GND Power supply GND input Input
    7 _ _ _
    8 _ _ _
    9 VDD_3.9V 3.9V Power
    10 _ _ _
    11 _ _ _
    12 GND GND GND
    13 VDD_3.9V 3.9V Power
    14 _ _ _
    15 _ _ _
    16 GND GND GND

     


    CON3 definition

    PinSymbolFunctionRemark
    1 VDD3V 3.3V power for JTAG interface Output
    2 JTAG_SWCLK CLK pin for JTAG interface Input
    3 GND GND for JTAG interface Output
    4 JTAG_SWDIO Data pin for JTAG interface I/O
    5 NRST Reset pin for JTAG interface Input
    6 GND GND Output
    7      
    8      
    9      
    10      
    11      
    12      
    13      
    14      
    15      
    16      

     

    Display Usage

    Functional description

    Smart Display can be used to display the coordinate, status and data information provided by the connected HOST device. Customers can configure the position coordinates they want to display in normal operation mode

    The Display is designed to be easily connected to a controller network, and to use the register type of Holding Register.


    Splash Screen

    The default splash image is shown below.

     

     This product is produced as a generic product. If you require a custom splash image for your application, contact us to discuss

    Default Selection

    Press the preferred application and hold for 3 seconds for the first time power on.

    Winstar's Smart Display Default Selection

    Acquisition of Displayed Data

    Smart Display uses the Modbus protocol to get and send the data.

    On Config mode, customers can set the coordinates or type of objects; On Display mode, customers can send and get data of objects.

    Configuring the Display

    Winstar Smart Display RS-485 series offers an out-of-the-box Modbus development experience that will lower customers' development costs and speed time-to-market expectations.

    The Smart Display can use wide-temperature are designed to support control applications in harsh operating conditions, which designed to be connected to a variety of different situation combinations, such as automotive, marine, power generation and oil-and-gas.

    The Smart Display comes with standard UI objects to get customers project off the ground quickly. If customers need custom UI objects support, our engineers are here to help. Send over your contents in PNG/JPG format, we will send over a new set of UI objects within 3~5 working days.

    The Smart Display is defined as a slave device, which is controlled by master device via RS-485 command to render display content on the display screen and return touch event data with protocol objects.

    Example Screen Layout (Industry application)

    Example Layout

    The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in an industry application situation.

     

    Example Layout (Vehicle automotive)

    The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a vehicle automotive situation.

     

    Example Layout (Medical application)

    The screen layout described in this section is intended to demonstrate the settings of screen items that can be used in a Medical application situation.

     

    Specifiche di prodotto
    Size 7"
    Resolution 1024x600
    Active Area (mm) 154.21x85.92
    Color Full Color
    Power supply 12V
    Display Interface CAN Bus
    View Angle IPS
    Sunlight Readable High 601~1200cd/m²
    Frame Yes
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni