DESCRIPTION
WFN0286DA2#0PW0-FC is a 2.86-inch bar type TFT LCD module with a resolution of 376x960 pixels. The module uses amorphous silicon TFT technology and has an active area measured diagonally at 2.86 inches.
This module supports a 3-wire SPI + RGB 24-bit interface and is driven by the ST7701P IC or equivalent. It is supplied without a touch panel.
The panel adopts IPS technology and provides 85-degree viewing angles in all directions. The typical brightness is 600 cd/m².
WFN0286DA2#0PW0-FC is a normally black, transmissive TFT LCD module with a glossy surface and an aspect ratio of 1:2.5. The operating temperature range is -30℃ to +85℃, and the storage temperature range is also -30℃ to +85℃.
Other options in this series include the high brightness version without touch, WFN0286DA2#0SPW0-FC, and the high brightness version with PCAP touch panel, WFN0286DA2#0SPW15-FC.
DRAWING

SPECIFICATIONS
General Specifications
| Item | Dimension | Unit |
| Size |
2.86 |
inch |
| Dot Matrix |
376 x RGB x 960 (TFT) |
dots |
| Module dimension |
31.2 (W) x 76.6 (H) x 2.23 (D) |
mm |
| Active area |
26.508 x 67.68 |
mm |
| Pixel Pitch |
0.0705 x 0.0705 |
mm |
| LCD type |
TFT, Normally Black, Transmissive |
| Viewing angle |
85/85/85/85 |
| Aspect Ratio |
1:2.5 |
| TFT Interface |
3W SPI+RGB24bit |
| TFT Driver IC |
ST7701P or Equivalent |
| Backlight Type |
LED, Normally White |
| Touch Panel |
Without Touch Panel |
| Surface |
Glare |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
| Operating Temperature |
TOP |
-30 |
- |
+85 |
℃ |
| Storage Temperature |
TST |
-30 |
- |
+85 |
℃ |
Electronical Characteristics
Operating conditions
| Item | Symbol | Min | Typ | Max | Unit |
| Interface Supply Voltage |
VCC |
2.5 |
2.8 |
3.3 |
V |
| Current for Driver |
IVCC |
- |
25 |
40 |
mA |
| Input voltage 'H' level |
VIH |
0.7*VCC |
- |
VCC |
V |
| Input voltage 'L' level |
VIL |
GND |
- |
0.3*VCC |
V |
| Output voltage 'H' level |
VOH |
0.8* VCC |
- |
VCC |
V |
| Output voltage 'L' level |
VOL |
GND |
- |
0.2* VCC |
V |
LED driving conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
| LED current |
- |
- |
20 |
- |
mA |
| LED voltage |
VLED+ |
18.2 |
20.0 |
22.4 |
V |
| LED Life Time |
- |
50,000 |
- |
- |
Hr |
Interface
LCM PIN Definition
Match connector: Molex 5025984593 or equivalent.
| Pin No. | Symbol | Description |
| 1 |
VLED- |
LED backlight cathode |
| 2 |
VLED+ |
LED backlight anode |
| 3 |
GND |
Power ground |
| 4 |
VCC |
Power Supply for Digital Circuit |
| 5 |
SDA |
SDA: Serial data input/output bidirectional pin for SPI Interface. |
| 6 |
SCL |
SCL: Serial clock input for SPI interface. |
| 7 |
CSX |
- A chip select signal Low: the chip is selected and accessible High: the chip is not selected and not accessible |
| 8 |
RESET |
Reset signal(low active) |
| 9 |
GND |
Power ground |
| 10~17 |
R7~R0 |
Red Data 7~0 |
| 18 |
GND |
Power ground |
| 19~26 |
G7~G0 |
Green Data 7~0 |
| 27 |
GND |
Power ground |
| 28~35 |
B7~B0 |
Blue Data 7~0 |
| 36 |
DE |
Data Enable (ENABLE) |
| 37 |
PCLK |
Clock Signals ; Latch Data at the Falling Edge (DOTCLK) |
| 38 |
HS |
Line synchronizing signal for RGB interface operation (HSYNC) |
| 39 |
VS |
Frame synchronizing signal for RGB interface operation (VSYNC) |
| 40 |
NC(TP_RST) |
No connection (CTP External Reset, Low is active) |
| 41 |
NC(TP_INT) |
No connection (CTP External interrupt to the host) |
| 42 |
NC(TP_SDA) |
No connection (CTP I2C data input and output) |
| 43 |
NC(TP_SCL) |
No connection (CTP I2C clock input) |
| 44 |
NC(TP_VDDT) |
No connection (CTP Power supply: +3.3V) |
| 45 |
NC(TP_VSS) |
No connection (CTP Ground for analog circuit) |
Specifiche di prodotto
|
Size
|
2.86" |
|
Resolution
|
376x960 |
|
Active Area (mm)
|
26.50x67.68 |
|
Color
|
Full Color |
|
Display Interface
|
RGB+SPI |
|
Display IC
|
No |
|
View Angle
|
IPS |
|
Frame
|
No |
|
Touch Panel
|
No touch |
|
O. Temperature (°C)
|
-30~85 |
|
Data Connection
|
FPC for ZIF Connector |
|
Pin Nr.
|
45 |
|
Pin Pitch
|
0.3mm |
|
Preferred - Not Preferred
|
Preferred |