DESCRIPTION
The Winstar TFT Q Series Modules provide the following innovative advantages to offer outstanding performance for colorful displays:
- Q Series integrated a 36 pin-out connector on SSD1963 controller board and all connectors are the same direction.
- Q Series modules are available in 8 bit and 16 bit parallel interface options.
- The pin no. 33 ~ 36 already pre-defined as backlight supply.
- Built in backlight driver IC, Q series TFT displays can be drive by 5.0V (3.5" and 4.3" also support 3.3V). The customers do not have to change the backlight driver circuits while change the TFT module sizes.
- The 5.7”, 7.0”, 8.0” and 10.2” Q Series are allowed to design “Sleep Mode” to close BIAS(VGH, VGL, AVDD) low power consumption mode.
- Resistive Touch Screen options are available for all Q Series display, and 4-Line signal (X1, Y1, X2, Y2) can be input from 36pin connector.
- Capacitive Touch Screen options are available for all Q Series display, and the I2C read/write protocol can be input from 36pin connector.
DRAWING
INTERFACE
| Pin | Symbol | Function |
| 1 |
GND |
System round pin of the IC. Connect to system ground. |
| 2 |
VDD |
Power Supply : +3.3V |
| 3 |
BL_E |
Backlight control signal , H: On \ L: Off |
| 4 |
D/C |
Data/Command select |
| 5 |
WR |
Write strobe signal |
| 6 |
RD |
Read strobe signal |
| 7~14 |
DB0~DB7 |
Data bus |
| 15~22 |
DB8~DB15 |
Data bus (When select 8bits Mode, this pin is NC) |
| 23~24 |
NC |
No connection |
| 25 |
CS |
Chip select |
| 26 |
RESET |
Hardware reset |
| 27 |
DIP ON |
Display control H: On \ L:Off |
| 28 |
NC |
No connection |
| 29 |
NC |
No connection |
| 30 |
NC |
No connection |
| 31 |
NC |
No connection |
| 32 |
YD |
Bottom electrode |
| 33~34 |
VLED- |
VLED- for B/L LED inverter (GND) |
| 35~36 |
VLED+ |
VLED+ for B/L LED inverter (+3.3V) |
Specifiche di prodotto
|
Size
|
4.3" |
|
Resolution
|
480x272 |
|
Active Area (mm)
|
95.04x53.85 |
|
Color
|
Full Color |
|
Display Interface
|
MCU (Parallel) |
|
Display IC
|
SSD1963 |
|
View Angle
|
O-Film |
|
Sunlight Readable
|
High 601~1200cd/m² |
|
Frame
|
Yes |
|
Touch Panel
|
No touch |
|
O. Temperature (°C)
|
-20~70 |
|
Data Connection
|
ZIF Connector |
|
Pin Nr.
|
36 |
|
Pin Pitch
|
0.5mm |
|
Preferred - Not Preferred
|
Preferred |