WF24-240320LD#0SP3-FC

Name: WF24-240320LD#0SP3-FC
SKU: WF24-240320LD#0SP3-FC
Price: 24.20 EUR
Availability: InStock

Si tratta dela prima recensione per questo prodotto

TFT 2.4" 240x320 Portrait LCD Panel, Interface MCU (Parallel/SPI) IC ILI9341V, High Brightness 800cd/m², Wide View Angle (IPS), Capacitive touch panel I2C interface (GG, IC CF1124)

Brand: Winstar

Cod.: WF24-240320LD#0SP3-FC

Kit accessori

Display Connector
Touch-Panel Connector

Prezzi per quantità

Quantità

10+

25+

Prezzo

€24,20

€21,80

€20,50

€20,00

Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

Disponibilità: Disponibile

€24,20 IVA esclusa

Quantità:

i h

Overview
Specifiche
Download
Contattaci

DESCRIPTION

The WF24-240320LD#0SP3-FC is a 2.4-inch portrait IPS TFT display module with a resolution of 240x320 pixels and 800 nits brightness, delivering crisp and clear visuals under various lighting conditions. Designed with all-around 80° wide viewing angles and a contrast ratio of 800:1, it ensures vibrant image quality in compact vertical applications.

This model features an integrated Projected Capacitive Touch Panel (PCAP) and uses the CF1124 touch controller IC, supporting I²C interface for touch functionality. The display is driven by the widely adopted ILI9341V driver IC, supporting 80 MCU 8/16/9-bit parallel and 3-wire 9-bit / 4-wire 8-bit SPI serial interfaces. With a long LED backlight lifetime of over 30,000 hours and a robust operating temperature range, the WF24-240320LD#0SP3-FC is ideal for handheld devices, portable medical equipment, and outdoor control systems that require intuitive touch interaction in a portrait layout.

DRAWING

SPECIFICATIONS

General Specifications

Item	Dimension	Unit
Size	2.4	inch
Dot Matrix	240 × RGB × 320(TFT)	dots
Module dimension	42.72(W) × 60.26(H) × 4.5(D)	mm
Active area	36.72 × 48.96	mm
Pixel Pitch	0.153 × 0.153	mm
LCD type	TFT, Normally Black, Transmissive
Controller IC	ILI9341V or equivalent
Viewing angle	80/80/80/80
Aspect Ratio	Portrait
Backlight Type	LED, Normally White
CTP Driver IC	CF1124 or equivalent
CTP Interface	I2C
CTP FW Version	0x01
CTP Resolution	240 * 320
Touch Panel	Projected Capacitive Touch Panel
Surface	Glare

Absolute Maximum Ratings

Item	Symbol	Min	Typ	Max	Unit
Operating Temperature	TOP	-20	－	+70	℃
Storage Temperature	TST	-30	－	+80	℃

Electrical Characteristics

Operating conditions

Item	Symbol	Min	Typ	Max	Unit
Supply Voltage For Analog	VCI	2.5	—	3.3	V
Supply Voltage For Logic	IOVCC	2.5	—	3.3	V
Supply Current For LCM	ICC	—	6	9	mA
Supply CTP	VDDT	3.0	3.3	3.6	V
Supply CTP	IDDT	—	14.0	25.0	mA

LED driving conditions

Parameter	Symbol	Min.	Typ.	Max.	Unit
LED current	—	—	40	—	mA
LED voltage	VBL+	10.8	11.6	12.4	V
LED Life Time	—	30,000	—	—	Hr

Interface Pin Function

LCM PIN Definition

Symbol

Function

I/O

GND

Ground

2-6

No connection

VCI

High voltage power supply for analog circuit blocks
(2.5 ~ 3.3 V)

IOVCC

Low voltage power supply for interface logic circuits
(2.5 ~ 3.3 V)

Tearing effect output pin to synchronize MPU to frame writing, activated by S/W command. When this pin is not activated, this pin is low.
If not used, open this pin.

Chip select signal.

D/CX(SCL)

(D/CX): This pin is used to select “Data or Command” in the parallel interface.
When DCX = 1, data is selected.
When DCX = 0, command is selected.
(SCL): This pin is used as the serial interface clock in 3-wire
9-bit/4-wire 8-bit serial data interface.
If not used, this pin should be connected to IOVCC or GND.

WR(SPI_D/C)

(WRX) - 8080-Ⅰ/8080-Ⅱ system: Serves as a write signal and writes data at the rising edge.
(D/CX) - 4-line system: Serves as the selector of command or parameter.
Fix to IOVCC level when not in use.

8080-Ⅰ/8080-Ⅱ system (RDX): Serves as a read signal and MCU read data at the rising edge.
Fix to IOVCC level when not in use.

14-29

DB0~DB15

18-bit parallel bi-directional data bus for MCU system.
Fix to GND level when not in use.

I/O

RESET

This signal will reset the device and must be applied to properly initialize the chip.
Signal is active low.

IM0

Select the MCU interface mode

IM2	IM1	IM0	MCU-Interface Mode	DB Pin in use
IM2	IM1	IM0	MCU-Interface Mode	Register/Content	GRAM
0	0	0	80 MCU 8-bit bus interface I	D[7:0]	D[7:0]
0	0	1	80 MCU 16-bit bus interface I	D[7:0]	D[15:0]
0	1	0	80 MCU 9-bit bus interface I	D[7:0]	D[8:0]
0	1	1	80 MCU 18-bit bus interface I	D[7:0]	D[17:0]
1	0	1	3-wire 9-bit data serial interface I	SDA: In/OUT
1	1	0	4-wire 8-bit data serial interface I	SDA: In/OUT

MPU Parallel interface bus and serial interface select
If use RGB Interface must select serial interface.
* : Fix this pin at IOVCC or GND.

IM1

IM2

DB16

18-bit parallel bi-directional data bus for MCU system and RGB
interface mode
Fix to GND level when not in use.

I/O

DB17

VLED-

Cathode of LED backlight.

VLED-

Cathode of LED backlight.

VLED+

Anode of LED backlight.

SDA

SDA : Serial in/out signal.
The data is applied on the rising edge of the SCL signal.
If not used, fix this pin at IOVCC or GND.

I/O

Not used, open this pin

CTP PIN Definition

Pin	Symbol	Function
1	VSS	Ground for analog circuit
2	VDDT	Power Supply : +3.3V
3	SCL	I2C clock input
4	NC	No connect
5	SDA	I2C data input and output
6	NC	No connect
7	/RST	External Reset, Low is active
8	NC	No connect
9	/INT	External interrupt to the host
10	VSS	Ground for analog circuit

Specifiche di prodotto

Size	2.4"
Resolution	240x320
Active Area (mm)	36.72x48.96
Color	Full Color
Display Interface	MCU (Parallel/SPI)
Display IC	ILI9341V
View Angle	IPS
Sunlight Readable	High 601~1200cd/m²
Frame	No
Touch Panel	Capacitive
O. Temperature (°C)	-20~70
Data Connection	FPC for ZIF Connector
Pin Nr.	40
Pin Pitch	0.5mm
Touch Panel IC Controller	CF1124
Preferred - Not Preferred	Preferred

You are running a Trial version of Nop Attachments

Nome completo *

La tua e-mail *

Oggetto: *

Richiesta *

Solo gli utenti registrati possono scrivere recensioni

Ultimi prodotti visti

WFN1560EA5#0P0-FC