Cerca
Italiano
Catalogo
    Menu Chiudi

    WF101-1024600JM#0SP8-FC

    TFT 10.1" 1024x600 LCD Panel, Interface MIPI (EK79007AD3 + EK73217BCGA), High Brightness 900cd/m², Wide View Angle (IPS), Capacitive touch panel USB/I2C interface (GG, ILI2511 IC)
    Brand: Winstar
    Cod.: WF101-1024600JM#0SP8-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €109,60
    €98,70
    €92,70

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €109,60 IVA esclusa
    i h

    RECOMMENDED ONLY AS SPARE PARTS

    For new projects please contact us at [email protected].

     

    MOQ

    After sample PO, MP MOQ 500pcs

     

    DESCRIPTION

    10.1 inch MIPI DSI interface High Brightness 1024 x 600 IPS TFT-LCD module with projected capacitive touch panel (PCAP). This TFT module is featured with IPS technology which is having the advantages of wider viewing angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical) and high brightness of 900 nits (typical value). This MIPI model is also available in resistive touch screen options.

    This module is built-in with EK79007AD3 and EK73217BCGA driver ICs; it supports 4-Lanes MIPI (Mobile Industry Processor Interface) DSI (Display Serial Interface), as to the capacitive touch panel is built-in with ILI2511 IC which supports USB and I2C interface. The MIPI DSI interface becomes more popular because of the characteristics of High Speed Data Transmission and High Speed Clock Transmission. This TFT display module featured with glare surface panel; aspect ratio 16:9, it can be operated at temperatures from -20℃ to +70℃; its storage temperatures range from -30℃ to +80℃.

     

    DRAWING

    SPECIFICATIONS

     

    Interface

    TFT LCD Module

    Pin No.SymbolDescription
    1 VLED+ LED Anode
    2 VLED+ LED Anode
    3 VGH Positive power for TFT
    4 VGL Negative power for TFT
    5 UPDN Gate up or down scan control.
    UPDN = ”L”, STV2 output vertical start pulse and UD pin output logical “L” to Gate driver. (default)
    UPDN = ”H”, STV1 output vertical start pulse and UD pin output logical “H” to Gate driver
    6 SHLR Source right or left sequence control.
    SHLR = ”L“, shift left: last data = S1←S2←S3….......←S1536 = first data.
    SHLR = ”H“, shift right: first data = S1→S2→S3….....→S1536 = last data.(default)
    7 VLED- LED Cathode
    8 VLED- LED Cathode
    9 AVDD Analog power
    10 GND Digital ground
    11 D3P MIPI data input.
    12 D3N MIPI data input.
    13 GND Digital ground
    14 D2P MIPI data input.
    15 D2N MIPI data input.
    16 GND Digital ground
    17 CLKP MIPI clock input
    18 CLKN MIPI clock input
    19 GND Digital ground
    20 D1P MIPI data input.
    21 D1N MIPI data input.
    22 GND Digital ground
    23 D0P MIPI data input.
    24 D0N MIPI data input.
    25 GND Digital ground
    26 STBYB Standby mode.
    STBYB = ”H“,normal operation(default)
    STBYB = ”L”, timing controller, source driver will turn off, all output are GND.
    27 RESET Global reset pin. Active Low to enter Reset State. Normally pull high. Connecting with an RC reset circuit for stability.
    28 VDD (1.8V) Digital power
    29 VDD (1.8V) Digital power
    30 VCOMI Common voltage
     

     

    PCAP PIN Definition

    PinSymbolFunction
    1 USB_VSS System ground
    2 USB_VDD 5V Power supply
    3 USB_D+ Data +
    4 USB_D- Data -
    5 VSS System ground
    6 SDA I2C data input and output
    7 SCL I2C clock input
    8 RST External Reset, Low is active
    9 INT External interrupt to the host
    10 VDDT 3.3 Power supply

     

    General Specifications

    ItemDimensionUnit
    Size 10.1 inch
    Dot Matrix 1024 RGB x 600 dots
    Module dimension 235(W) x 143(H) x 8.78(D) mm
    Active area 222.72 (H) x 125.28(V) mm
    Pixel pitch 0.2175(W) x 0.2088(H) mm
    LCD type TFT, Normally Black, Transmissive
    Interface 4-Lanes MIPI
    Driver IC EK79007AD3 + EK73217BCGA or equivalent
    Viewing Angle 85/85/85/85
    Aspect Ratio 16:9
    Backlight Type LED, Normally White
    PCAP IC ILI2511 or equivalent
    PCAP Interface USB (I2C available)
    PCAP FW Version: V6.0.0.0.62.90.1.2
    Touch Panel Projected Capacitive Touch Screen, PCAP
    Surface Glare

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -20 - +70 ℃
    Storage Temperature TST -30 - +80 ℃

     

    Electrical Characteristics

    Typical Operation Conditions (At Ta = 25 °C,)

    ItemSymbolMin.Typ.Max.Unit
    Digital Power Supply Voltage For LCD VDD 1.71 1.8 1.89 V
    Analog Power Supply Voltage AVDD 9.89 10.2 10.5 V
    Gate On Power Supply Voltage VGH 19.4 20.0 20.6 V
    Gate Off Power Supply Voltage VGL -10.3 -10.0 -9.7 V
    Common Power Supply Voltage VCOMI 4.0 4.3 4.6 V
    Supply PCAP VDDT 3.0 3.3 3.6 V
    IVDDT   90.5 115 mA
    USB_VDD 5V 4.4 5.0 5.5 V
    I VDD 5V — 97.8 120 mA


    Specifiche di prodotto
    Size 10.1"
    Resolution 1024x600
    Active Area (mm) 222.72x125.28
    Color Full Color
    Display Interface MIPI
    Display IC EK79007AD3 + EK73217BCGA
    View Angle IPS
    Sunlight Readable High 601~1200cd/m²
    Frame No
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 30
    Pin Pitch 0.5mm
    Touch Panel IC Controller ILI2511
    Preferred - Not Preferred Not Preferred
    Date Notice Link/Description
    2026/09/14 EOL

    Winstar TFT Series WF18*F/G/H, WF40*C & WF101*J due to Hannstar Panel End of Life

     

    For more details, please contact us @ [email protected]

    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni