Description
WF0675-4801280AM#0SP0-FC is a 6.75-inch TFT-LCD module that adopts TFT IPS technology, providing impressive sharpness, superior color reproduction, better image consistency, and a high contrast ratio of 1500:1 (typical value). It boasts wide viewing angles (left: 85 / right: 85 / top: 85 / bottom: 85 degrees), high brightness of 1200 nits (typical value), and high resolution of 480×1280. The module dimension is 66.8 x 181.1 mm, with an active area of 60.19 x 160.512 mm.
WF0675-4801280AM#0SP0-FC is built-in with FL7703NI-G5-DP driver IC and supports the MIPI interface, enabling high-speed data transmission and high-speed timing transmission. The operating temperature range is -20°C to +70°C; the storage temperature range is -30°C to +80°C. The supply voltage for logic is 3.0V to 3.6V, with a typical value of 3.3V.
This IPS TFT-LCD can be applied in the gaming industry, such as game console top decorations and small electronic tabletop games.
Specifications
Interface Pin Function
LCM PIN Definition
| Pin No. | Symbol | Description |
| 1 |
GND |
Ground |
| 2 |
D3N |
High speed interface data differential signal input pins. |
| 3 |
D3P |
| 4 |
GND |
Ground |
| 5 |
D2N |
High speed interface data differential signal input pins. |
| 6 |
D2P |
| 7 |
GND |
Ground |
| 8 |
CLKN |
High speed interface clock differential signal input pins. OPEN |
| 9 |
CLKP |
| 10 |
GND |
Ground |
| 11 |
D1N |
High speed interface data differential signal input pins. |
| 12 |
D1P |
| 13 |
GND |
Ground |
| 14 |
D0N |
High speed interface data differential signal input/output pins. |
| 15 |
D0P |
| 16 |
GND |
Ground |
| 17 |
GND |
Ground |
| 18 |
TE |
Serve as a TE (Tearing Effect) output signal Leave the pin open when not in use. |
| 19 |
RESET |
Reset pin. This signal will reset the device and must be applied to properly initialize the chip. |
| 20 |
GND |
Ground |
| 21-23 |
VCC |
Power supply |
| 24 |
GND |
Ground |
| 25-28 |
NC |
No connection |
| 29 |
VLED- |
Power for LED backlight cathode |
| 30 |
VLED+ |
Power for LED backlight anode |
General Specifications
| Item | Dimension | Unit |
| Size |
6.75 |
inch |
| Dot Matrix |
480 x 3(RGB) x 1280 |
dots |
| Module dimension |
66.8 x 181.1 x 4.55 |
mm |
| Active area |
60.19 x 160.512 |
mm |
| Pixel pitch |
0.1254 x 0.1254 |
mm |
| LCD type |
TFT, Normally Black ,Transmissive |
| View Angle |
85/85/85/85 |
| TFT Control IC |
FL7703NI-G5-DP or Equivalent |
| TFT Interface |
MIPI |
| Backlight Type |
LED,Normally White |
| With /Without TP |
Without TP |
| Surface |
Glare |
*Color tone slight changed by temperature and driving voltage.
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
| Operating Temperature |
TOP |
-20 |
- |
+70 |
℃ |
| Storage Temperature |
TST |
-30 |
- |
+80 |
℃ |
Electrical Characteristics
Operating conditions
| Item | Symbol | Min | Typ | Max | Unit |
| Supply Voltage For Logic |
VCC |
3.0 |
3.3 |
3.6 |
V |
| Supply LCM current |
Icc |
- |
80 |
120 |
mA |
LED driving conditions
| Parameter | Symbol | Min | Typ | Max | Unit |
| LED current |
- |
- |
180 |
- |
mA |
| LED voltage |
VLED+ |
15.6 |
18.0 |
20.4 |
V |
| LED Life Time |
- |
- |
50,000 |
- |
Hr
|
DRAWING

Specifiche di prodotto
|
Size
|
6.75" |
|
Resolution
|
480x1280 |
|
Active Area (mm)
|
60.19x160.51 |
|
Color
|
Full Color |
|
Display Interface
|
MIPI |
|
Display IC
|
FL7703NI-G5-DP |
|
View Angle
|
IPS |
|
Sunlight Readable
|
High 601~1200cd/m² |
|
Frame
|
No |
|
Touch Panel
|
No touch |
|
O. Temperature (°C)
|
-20~70 |
|
Data Connection
|
FPC for ZIF Connector |
|
Pin Nr.
|
30 |
|
Pin Pitch
|
0.5mm |
|
Preferred - Not Preferred
|
Preferred |