Cerca
Italiano
Catalogo
    Menu Chiudi

    WF0675-4801280AM#0P3-FC

    TFT 6.75" 480x1280, Bar Type, Interface MIPI (4-lanes) IC FL7703NI-G5-DP, 400cd/m², Wide View Angle (IPS), Capacitive touch panel I2C interface (GG, GT911)
    Brand: Winstar
    Cod.: WF0675-4801280AM#0P3-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €47,80
    €43,10
    €40,50

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €47,80 IVA esclusa
    i h

    Description

    WF0675-4801280AM#0P3-FC is a 6.75 inch TFT-LCD display module, adopting TFT IPS technology, providing remarkable sharpness, superior color reproduction, better image consistency, and high contrast ratio of 1500:1 (typical value), with a wide viewing angle (left: 85 / right: 85 / top: 85 / bottom: 85 degrees), brightness of 400 nits (typical value), and resolution of 480×1280.

    WF0675-4801280AM#0P3-FC supports MIPI interface, capable of high-speed data transmission and high-speed timing transmission, with a built-in FL7703NI-G5-DP driver IC. This TFT is equipped with a CTP touch panel (detect 5 points), with a built-in GT911 driver IC for the touch panel, supporting I2C interface. The operating temperature range is -20°C to +70°C; the storage temperature range is -30°C to +80°C. The operating voltage range is 3.0V to 3.6V, with a typical value of 3.3V.

    This IPS TFT-LCD can be applied in the gaming industry, such as gaming machine top decorations, small electronic tabletop games, and machine control buttons.

     

    DRAWING

     

    Specification

    Interface Pin Function

    LCM PIN Definition

    Pin No.SymbolPin Description
    1 GND Ground
    2 D3N High speed interface data differential signal input pins.
    3 D3P
    4 GND Ground
    5 D2N High speed interface data differential signal input pins.
    6 D2P
    7 GND Ground
    8 CLKN High speed interface clock differential signal input pins. OPEN
    9 CLKP
    10 GND Ground
    11 D1N High speed interface data differential signal input pins.
    12 D1P
    13 GND Ground
    14 D0N High speed interface data differential signal input/output pins.
    15 D0P
    16 GND Ground
    17 GND Ground
    18 TE Serve as a TE (Tearing Effect) output signal
    Leave the pin open when not in use.
    19 RESET Reset pin. This signal will reset the device and must be applied to properly initialize the chip.
    20 GND Ground
    21-23 VCC Power supply
    24 GND Ground
    25-28 NC No connection
    29 VLED- Power for LED backlight cathode
    30 VLED+ Power for LED backlight anode

     

    CTP PIN Definition

    PinSymbolFunction
    1 VSS Ground for analog circuit
    2 VDDT Power Supply : +3.3V
    3 SCL I2C clock input
    4 NC No connection
    5 SDA I2C data input and output
    6 NC No connection
    7 /RST External Reset, Low is active
    8 NC No connection
    9 /INT External interrupt to the host
    10 VSS Ground for analog circuit

     

    General Specifications

    ItemDimensionUnit
    Size 6.75 inch
    Dot Matrix 480 x 3(RGB) x 1280 dots
    Module dimension 74.4 x 1881.1 x 6.6 mm
    Active area 60.19 x 160.512 mm
    Pixel pitch 0.1254 x 0.1254 mm
    LCD type TFT, Normally Black ,Transmissive
    View Angle 85/85/85/85
    Driver IC FL7703NI-G5-DP or Equivalent
    Interface MIPI
    CTP Driver IC GT911 or Equivalent
    CTP Interface I2C
    CTP FW Version HSD_0686097_GT911_1060_V70_480x1280_20230916
    CTP Resolution 480*1280
    Backlight Type LED,Normally White
    With /Without TP With CTP
    Surface Glare

    *Color tone slight changed by temperature and driving voltage.

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -20 - +70 ℃
    Storage Temperature TST -30 - +80 ℃

     

    Electrical Characteristics

    Operating conditions

    ItemSymbolMinTypMaxUnit
    Supply Voltage For Logic VCC 3.0 3.3 3.6 V
    Supply LCM current Icc - 80 120 mA
    Supply CTP VCTP 2.8 3.3 3.6 mA
    ICTP - 13.0 20.0 mA

     

    LED driving conditions

    ParameterSymbolMinTypMaxUnit
    LED current - - 120 - mA
    LED voltage VLED+ 15.6 18.0 20.4 V
    LED Life Time - - 50,000 - Hr

     

    Specifiche di prodotto
    Size 6.75"
    Resolution 480x1280
    Active Area (mm) 60.19x160.51
    Color Full Color
    Display Interface MIPI
    Display IC FL7703NI-G5-DP
    View Angle IPS
    Frame No
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 30
    Pin Pitch 0.5mm
    Touch Panel IC Controller GT911
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni