Cerca
Italiano
Catalogo
    Menu Chiudi
    PMOLED 2.42" Graphic 128x64, Yellow color, COG + PCB, 3V, Interface 6800, Frame, Glare, Capacitive touch panel I2C (IC GT911)
    Brand: Winstar
    Cod.: WEO12864L#J0D-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €38,60
    €34,80
    €32,70

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €38,60 IVA esclusa
    i h

    DESCRIPTION

    Popular size 2.42 inch Graphic OLED display with Capacitive Touch Screen on module; which is made of resolution 128x64 dots. This module is built in with SSD1309 IC, it supports 6800 8-bit parallel interface, optional 8080 parallel, 4-wire SPI and I2C interface, supply voltage for Logic 3V, 1/64 driving duty. This model is built in with GT911 touch panel IC on module, which supports I2C interface, one Detect Point for Capacitive Touch Screen.

    This 2.42" WEO012864J with CTP model is ideal for smart home applications, intelligent technology devices, energy systems, meter devices, communication systems, medical instrument, etc. Operating temperatures from -20℃ to +70℃; storage temperatures range from -30℃ to +80℃.

     

    DRAWING

     

     

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 VDD Power supply pin for core logic operation
    2 VSS Ground.
    3 NC(GND) No connection
    4~11 D0~D7 These pins are bi-directional data bus connecting to the MCU data bus.
    Unused pins are recommended to tie LOW.
    12 CS# This pin is the chip select input connecting to the MCU.
    The chip is enabled for MCU communication only when CS# is pulled LOW (active LOW).
    13 NC(GND) No connection
    14 RES# This pin is reset signal input.
    When the pin is pulled LOW, initialization of the chip is executed.
    Keep this pin pull HIGH during normal operation.
    15 R/W# This pin is read / write control input pin connecting to the MCU interface.
    When 6800 interface mode is selected, this pin will be used as Read/Write (R/W#) selection input. Read mode will be carried out when this pin is pulled HIGH and write mode when LOW.
    16 D/C# This pin is Data/Command control pin connecting to the MCU.
    When the pin is pulled HIGH, the data at D[7:0] will be interpreted as data.
    When the pin is pulled LOW, the data at D[7:0] will be transferred to a command register.
    17 E This pin is MCU interface input.
    When 6800 interface mode is selected, this pin will be used as the Enable (E) signal.
    18 NC(GND) No connection
    19 DISP No Connection
    20 NC(GND) No connection
    21 TP_INT Interrupt signal, active low, asserted to request
    Host start a new transaction
    22 TP_SDA I2C data signal
    23 TP_SCL I2C clock signal
    24 TP_RST External reset signal, active low

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 128 x 64 -
    Module dimension 75.0 × 52.7 ×10.2 MAX mm
    Active Area 55.01 × 27.49 mm
    Pixel Size 0.40 × 0.40 mm
    Pixel Pitch 0.43 × 0.43 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/64 Duty
    IC SSD1309
    Interface 8Bits 6800 , Optional 8080 / 4-SPI / I2C
    Size 2.42 inch
    PCAP IC GT911
    Detect Point 1
    PCAP Interface I2C
    Surface Normal Glare

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VDD -0.3 4 V
    Operating Temperature TOP -20 +70 °C
    Storage Temperature TSTG -30 +80 °C

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD - 2.8 3.0 3.3 V
    High Level Input VIH - 0.8×VDD - - V
    Low Level Input VIL - - - 0.2×VDD V
    High Level Output VOH - 0.9×VDD - - V
    Low Level Output VOL - - - 0.1×VDD V
    50% Check Board operating Current IDD VDD =3V - 150 300 mA


    Specifiche di prodotto
    Size 2.42"
    Resolution 128x64
    Active Area (mm) 55.01x27.49
    Dot Size 0.40x0.40
    Polarizer Glare
    Color Yellow
    Power supply 3V
    Display Interface 8080 (option 6800/SPI/I2C)
    Display IC SSD1309Z
    Constructive Structure COG + PCB
    Frame Yes
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection Soldering PAD
    Pin Nr. 24
    Pin Pitch 2.54mm
    Touch Panel IC Controller GT911
    Preferred - Not Preferred Not Preferred
    You are running a Trial version of Nop Attachments
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni