Cerca
Italiano
Catalogo
    Menu Chiudi
    PMOLED 1.1" Graphic 96x64, Yellow color, COG + PCB, 3V, Interface SPI (option I2C) , Anti-glare
    Brand: Winstar
    Cod.: WEA9664L#B00-FC
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €13,20
    €11,90
    €11,20
    €10,90

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €13,20 IVA esclusa
    i h

    DRAWING

    96x64 OLED Display,1.1 OLED - WEA009664B - Winstar Display

     

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 SDA When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN.
    When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
    2 SCL
    3 SA0 In I2C mode, this pin acts as SA0 for slave address selection.
    When 3-wire serial interface is selected, this pin must be connected to VSS.
    4 RST This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed.
    Keep this pin HIGH (i.e. connect to VDD) during normal operation.
    5 CS This pin is the chip select input. (active LOW).
    6 VDD 3.0V Power supply pin for core logic operation.
    7 VIN 5.0V Power supply pin for core logic operation.
    8 GND This is a ground pin.

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 96 × 64 Dots
    Module dimension 31.5 × 31.5 × 2.72 mm
    Active Area 22.53 × 15.01 mm
    Pixel Size 0.205 × 0.205 mm
    Pixel Pitch 0.235 × 0.235 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Gray scale 4 bits
    Drive Duty 1/64 Duty
    IC SSD1327
    Interface SPI ,Optional I2C
    Size 1.1 inch

     

    Electronical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD - 2.8 3.0 3.2 V
    Supply Voltage for Logic VIN - 4.8 5.0 5.2 V
    Supply Voltage for Display VCC - 7.5 8.0 8.5 V
    Input High Volt. VIH - 0.8×VDD - VDDIO V
    Input Low Volt. VIL - 0 - 0.2×VDD V
    Output High Volt. VOH - 0.9×VDD - VDDIO V
    Output Low Volt. VOL - 0 - 0.1×VDD V
    50% Check Board operating Current IDD VDD=3.0V - 55 100 mA

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VDD 1.65 3.30 V
    Supply Voltage for Logic VIN 4.0 6.0 V
    Supply Voltage for Display VCC 0 16.0 V
    Operating Temperature TOP -40 80 °C
    Storage Temperature TSTG -40 85 °C


    Specifiche di prodotto
    Size 1.1"
    Resolution 96x64
    Active Area (mm) 22.53x15.01
    Dot Size 0.20x0.20
    Polarizer Anti-glare
    Color Yellow
    Power supply 3V
    Display Interface SPI (option I2C)
    Display IC SSD1327
    Constructive Structure COG + PCB
    Frame Yes
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection Pin Strip
    Pin Nr. 8
    Pin Pitch 2.54mm
    Preferred - Not Preferred Not Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni