Cerca
Italiano
Catalogo
    Menu Chiudi

    WEA12832L#PA3N00000-FC

    PMOLED 1.71" Graphic 128x32, Yellow, COG+PCB, 3.3V, Interface SPI, Anti-glare
    Brand: Winstar
    Cod.: WEA12832L#PA3N00000-FC
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €12,60
    €11,40
    €10,70
    €10,40

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €12,60 IVA esclusa
    i h

     

    DESCRIPTION

    It is 1.71 inches graphic COG module with PCB. It has a resolution of 128x64 pixels and a CH1115 driver IC supporting a 4-wire SPI interface with 1/32 driving duty. Its logic supply voltage ranges from 1.8 V to 3.3 V; the typical value is 3 V.

    The module can work within the temperature range of -40°C to +80°C; its storage temperatures cover from -40°C to +85°C.

     

    DRAWING

    1.71 inch Graphic OLED Display Module 128x32 (COG+PCB)

    SPECIFICATIONS

     

    Interface Pin Function

    No.SymbolFunction
    1 GND Ground.
    2 VCC Power supply pin for logic.
    3 D0 When the serial interface is selected, then D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SI).
    4 D1
    5 RES# This pin is reset signal input. When the pin is pulled LOW, initialization of the chip is executed. Keep this pin HIGH (i.e. connect to VDD) during normal operation.
    6 D/C# This is the Data/Command control pad that determines whether the data bits are data or a command.
    D/C = "H": the inputs at D0 and D1 are treated as display data.
    D/C = "L": the inputs at D0 and D1 are transferred to the command registers.
    7 CS# This pin is the chip select input. (active LOW)

     

    General Specifications

    ItemDimensionUnit
    Dot Matrix 128 x 32 Dots
    Module dimension 60.0 × 18.75 × 5.96(MAX) mm
    Active Area(AA) 42.22 × 10.54 mm
    Pixel Size 0.308 × 0.308 mm
    Pixel Pitch 0.33 × 0.33 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/32 Duty
    IC CH1115
    Interface 4-Wire SPI
    Size 1.71 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VCC -0.3 3.6 V
    Operating Temperature TOP -40 +80 °C
    Storage Temperature TSTG -40 +85 °C

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VCC - 1.8 3.0 3.3 V
    High Level Input VIH - 0.8×VCC - VCC V
    Low Level Input VIL - GND - 0.2×VCC V
    High Level Output VOH - 0.8×VCC - VCC V
    Low Level Output VOL - GND - 0.2×VCC V
    Display 50% Pixel on ICC VCC =3V - 40 30 mA
     
    Specifiche di prodotto
    Size 1.71"
    Resolution 128x32
    Active Area (mm) 42.22x10.54
    Dot Size 0.31x0.31
    Polarizer Anti-glare
    Color Yellow
    Power supply 3V
    Display Interface SPI
    Display IC CH1115
    Constructive Structure COG + PCB
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection Pin Strip
    Pin Nr. 7
    Pin Pitch 2.54mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni