DESCRIPTION
WF88-4801920BH#VP15-FC is an 8.8-inch bar type TFT LCD display with a 480×1920 resolution, HDMI (DVI) interface, and an integrated control board for simplified system integration.
This module uses a Normally Black, Transmissive TFT panel with IPS wide viewing angles (85/85/85/85), a typical brightness of 450 cd/m², and a typical contrast ratio of 650:1.
The display includes a projected capacitive touch panel (PCAP) with OCA bonding and USB interface. With its 1:4 bar type format, this module is suitable for HMI, control panel, and instrumentation applications.
DRAWING

SPECIFICATIONS
General Specifications
| Item | Dimension | Unit |
| Size |
8.8 |
inch |
| Dot Matrix |
480 x R.G.B. x 1920 |
dots |
| Module dimension |
241.3 x 74.3 x 26.6 |
mm |
| Active area |
218.88 x 54.72 |
mm |
| Pixel pitch |
0.114 x 0.114 |
mm |
| LCD type |
TFT, Normally black, Transmissive |
| Viewing angle |
85/85/85/85 |
| Aspect Ratio |
1:4 |
| Backlight Type |
LED, Normally White |
| Electrical Interface (Logic) |
DVI |
| CTP FW Version |
0x66 |
| CTP IC |
GT928 or equivalent |
| CTP Interface |
USB |
| CTP Resolution |
480*1920 |
| Touch Panel |
Capacitive Touch Panel |
| Surface |
Glare |
Absolute Maximum Ratings
| Item | Symbol | Min | Typ | Max | Unit |
| Operating Temperature |
TOP |
-20 |
- |
+70 |
℃ |
| Storage Temperature |
TST |
-30 |
- |
+80 |
℃ |
Electrical Characteristics
Operating conditions
| Item | Symbol | Min | Typ | Max | Unit |
| Supply Voltage For LCM |
VDD |
4.75 |
5 |
5.25 |
V |
| Supply Current For LCM |
IDD |
- |
813 |
1220 |
mA |
| LED Life Time |
- |
- |
30,000 |
- |
Hr |
Interface
1.LCM PIN Definition(CON4)
| Pin No. | Symbol | Function |
| 1 |
NC |
No connection |
| 2 |
5V |
Raspberry Pi:Power 5V |
| 3 |
GPIO02 |
Raspberry Pi:GPIO02 |
| 4 |
5V |
Raspberry Pi:Power 5V |
| 5 |
GPIO03 |
Raspberry Pi:GPIO03 |
| 6 |
GND |
Raspberry Pi:GND |
| 7 |
GPIO04 |
Raspberry Pi:GPIO04 |
| 8 |
GPIO14 |
Raspberry Pi:GPIO14 |
| 9 |
GND |
Raspberry Pi:GND |
| 10 |
GPIO15 |
Raspberry Pi:GPIO15 |
| 11 |
GPIO17 |
Raspberry Pi:GPIO17 |
| 12 |
BL-PWM GPIO18 |
Raspberry Pi:GPIO18 (Backlight Enable) |
| 13 |
GPIO27 |
Raspberry Pi:GPIO27 |
| 14 |
GND |
Raspberry Pi:GND |
| 15 |
GPIO22 |
Raspberry Pi:GPIO22 |
| 16 |
GPIO23 |
Raspberry Pi:GPIO23 |
| 17 |
NC |
No connection |
| 18 |
GPIO24 |
Raspberry Pi:GPIO24 |
| 19 |
GPIO10 |
Raspberry Pi:GPIO10 |
| 20 |
GND |
Raspberry Pi:GND |
| 21 |
GPIO09 |
Raspberry Pi:GPIO09 |
| 22 |
GPIO25 |
Raspberry Pi:GPIO25 |
| 23 |
GPIO11 |
Raspberry Pi:GPIO11 |
| 24 |
GPIO08 |
Raspberry Pi:GPIO08 |
| 25 |
GND |
Raspberry Pi:GND |
| 26 |
GPIO07 |
Raspberry Pi:GPIO07 |
| 27 |
ID_SD |
Raspberry Pi:ID_SD |
| 28 |
ID_SC |
Raspberry Pi:ID_SC |
| 29 |
GPIO05 |
Raspberry Pi:GPIO05 |
| 30 |
GND |
Raspberry Pi:GND |
| 31 |
GPIO06 |
Raspberry Pi:GPIO06 |
| 32 |
GPIO12 |
Raspberry Pi:GPIO12 |
| 33 |
GPIO13 |
Raspberry Pi:GPIO13 |
| 34 |
GND |
Raspberry Pi:GND |
| 35 |
GPIO19 |
Raspberry Pi:GPIO19 |
| 36 |
GPIO16 |
Raspberry Pi:GPIO16 |
| 37 |
GPIO26 |
Raspberry Pi:GPIO26 |
| 38 |
GPIO20 |
Raspberry Pi:GPIO20 |
| 39 |
GND |
Raspberry Pi:GND |
| 40 |
GPIO21 |
Raspberry Pi:GPIO21 |
2.CON5
| Pin No. | Symbol | Function |
| 1 |
3.3V |
TFT Module Power limit can only output 3.3V,100mA |
| 2 |
5V |
Raspberry Pi:Power 5V |
| 3 |
GPIO02 |
Raspberry Pi:GPIO02 |
| 4 |
5V |
Raspberry Pi:Power 5V |
| 5 |
GPIO03 |
Raspberry Pi:GPIO03 |
| 6 |
GND |
Raspberry Pi:GND |
| 7 |
GPIO04 |
Raspberry Pi:GPIO04 |
| 8 |
GPIO14 |
Raspberry Pi:GPIO14 |
| 9 |
GND |
Raspberry Pi:GND |
| 10 |
GPIO15 |
Raspberry Pi:GPIO15 |
| 11 |
GPIO17 |
Raspberry Pi:GPIO17 |
| 12 |
BL-PWM GPIO18 |
Raspberry Pi:GPIO18 (Backlight Enable) |
| 13 |
GPIO27 |
Raspberry Pi:GPIO27 |
| 14 |
GND |
Raspberry Pi:GND |
| 15 |
GPIO22 |
Raspberry Pi:GPIO22 |
| 16 |
GPIO23 |
Raspberry Pi:GPIO23 |
| 17 |
3.3V |
TFT Module Power limit can only output 3.3V,100mA |
| 18 |
GPIO24 |
Raspberry Pi:GPIO24 |
| 19 |
GPIO10 |
Raspberry Pi:GPIO10 |
| 20 |
GND |
Raspberry Pi:GND |
| 21 |
GPIO09 |
Raspberry Pi:GPIO09 |
| 22 |
GPIO25 |
Raspberry Pi:GPIO25 |
| 23 |
GPIO11 |
Raspberry Pi:GPIO11 |
| 24 |
GPIO08 |
Raspberry Pi:GPIO08 |
| 25 |
GND |
Raspberry Pi:GND |
| 26 |
GPIO07 |
Raspberry Pi:GPIO07 |
| 27 |
ID_SD |
Raspberry Pi:ID_SD |
| 28 |
ID_SC |
Raspberry Pi:ID_SC |
| 29 |
GPIO05 |
Raspberry Pi:GPIO05 |
| 30 |
GND |
Raspberry Pi:GND |
| 31 |
GPIO06 |
Raspberry Pi:GPIO06 |
| 32 |
GPIO12 |
Raspberry Pi:GPIO12 |
| 33 |
GPIO13 |
Raspberry Pi:GPIO13 |
| 34 |
GND |
Raspberry Pi:GND |
| 35 |
GPIO19 |
Raspberry Pi:GPIO19 |
| 36 |
GPIO16 |
Raspberry Pi:GPIO16 |
| 37 |
GPIO26 |
Raspberry Pi:GPIO26 |
| 38 |
GPIO20 |
Raspberry Pi:GPIO20 |
| 39 |
GND |
Raspberry Pi:GND |
| 40 |
GPIO21 |
Raspberry Pi:GPIO21 |
3.DVI
| Pin No. | Symbol | I/O | Function |
| 1 |
Rx2+ |
I |
Channel-2 positive receiver input; low-voltage signal differential- input pair. |
| 2 |
GND |
P |
Ground |
| 3 |
Rx2- |
I |
Channel-2 negative receiver input; low-voltage signal differential- input pair. |
| 4 |
Rx1+ |
I |
Channel-1 positive receiver input; low-voltage signal differential- input pair. |
| 5 |
GND |
P |
Ground |
| 6 |
Rx1- |
I |
Channel-1 negative receiver input; low-voltage signal differential- input pair. |
| 7 |
Rx0+ |
I |
Channel-0 positive receiver input; low-voltage signal differential- input pair. |
| 8 |
GND |
P |
Ground |
| 9 |
Rx0- |
I |
Channel-0 negative receiver input; low-voltage signal differential- input pair. |
| 10 |
RxC+ |
I |
Clock positive receiver input; low-voltage signal differential- input pair. |
| 11 |
GND |
P |
Ground |
| 12 |
RxC- |
I |
Clock negative receiver input; low-voltage signal differential- input pair. |
| 13-14 |
NC |
- |
No connection |
| 15 |
SCL |
I/O |
DDC(Data Display Channel) Clock |
| 16 |
SDA |
I/O |
DDC(Data Display Channel) Data |
| 17 |
GND |
P |
Ground |
| 18 |
HDMI_5V |
P |
Power Supply |
| 19 |
Detect |
I/O |
Hot plug detect |
I: input, O: output, P: Power
4.USB
| Pin No | Symbol | Function |
| A1 |
GND |
Power Ground |
| A4 |
NC |
No connection |
| A5 |
NC |
No connection |
| A6 |
D+ |
Data line + |
| A7 |
D- |
Data line - |
| A8 |
NC |
No connection |
| A9 |
NC |
No connection |
| A12 |
GND |
Power Ground |
| B12 |
GND |
Power Ground |
| B9 |
NC |
No connection |
| B8 |
NC |
No connection |
| B7 |
D- |
Data line - |
| B6 |
D+ |
Data line + |
| B5 |
NC |
No connection |
| B4 |
NC |
No connection |
| B1 |
GND |
Power Ground |
5. PW_5V
| Pin No | Symbol | Function |
| A1 |
GND |
Power Ground |
| A4 |
VBUS |
Power 5V |
| A5 |
CC1 |
Configuration channel |
| A6 |
NC |
No connection |
| A7 |
NC |
No connection |
| A8 |
NC |
No connection |
| A9 |
VBUS |
Power 5V |
| A12 |
GND |
Power Ground |
| B12 |
GND |
Power Ground |
| B9 |
VBUS |
Power 5V |
| B8 |
NC |
No connection |
| B7 |
NC |
No connection |
| B6 |
NC |
No connection |
| B5 |
CC2 |
Configuration channel |
| B4 |
VBUS |
Power 5V |
| B1 |
GND |
Power Ground |
Specifiche di prodotto
|
Size
|
8.8" |
|
Resolution
|
1920x480 |
|
Active Area (mm)
|
218.88x54.72 |
|
Color
|
Full Color |
|
Display Interface
|
HDMI |
|
View Angle
|
IPS |
|
Frame
|
No |
|
Touch Panel
|
Capacitive |
|
O. Temperature (°C)
|
-20~70 |
|
Data Connection
|
HDMI Connector / Raspberry Connector |
|
Touch Panel IC Controller
|
GT928 |
|
Preferred - Not Preferred
|
Preferred |