Cerca
Filters
Close

WF43-480272WS#0SPW1B-FC

TFT 4.3" 480x272 LCD Panel, Interface SPI (4-wire), High Brightness 700cd/m², Wide view angle (IPS), Super Extended Temperature, Resistive touch panel

DRAWING

 
 
 

SPECIFICATIONS

Interface

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 NC No connection
4 VCI Power supply for analog circuit
5 IOVCC Power supply for digital interface I/O pins
6 GND Ground
7 RESET Reset
8 GND Ground
9 CS Chip select, internal pull high. (CSX)
10 SCL This pin is used serial interface clock
11 GND Ground
12 SDA SPI bi-direction data pin (SDA)
13 DCX Command or parameter select.
14 NC No connection
15 NC No connection
16 GND Ground
17 TE Tearing effect output pin is used to synchronize MCU frame writing, activated by S/W command. When this pin is not activated (TE function OFF), this pin is GND level.
18 GND Ground

 

General Specifications

ItemDimensionUnit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.05(D) mm
Active area 95.04 × 53.856 mm
Dot pitch 0.198 × 0.198 mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
TFT Driver IC NV3041A-01 or equivalent
TFT Interface 4 Line SPI
Backlight Type LED, Normally White
With/Without TP With RTP
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Power supply for analog circuit VCI 3.0 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65  1.8 3.3 V
Current for Driver IVCI - 30 45 mA
IIOVCC - 20 30 mA
SKU: WF43-480272WS#0SPW1B-FC
Brand: Winstar
Disponibile: Si
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€28,90
€23,10
€19,60

Per quantita’ maggiori di 25pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

€28,90 IVA esclusa

DRAWING

 
 
 

SPECIFICATIONS

Interface

PinSymbolFunction
1 VLED- Power for LED backlight cathode
2 VLED+ Power for LED backlight anode
3 NC No connection
4 VCI Power supply for analog circuit
5 IOVCC Power supply for digital interface I/O pins
6 GND Ground
7 RESET Reset
8 GND Ground
9 CS Chip select, internal pull high. (CSX)
10 SCL This pin is used serial interface clock
11 GND Ground
12 SDA SPI bi-direction data pin (SDA)
13 DCX Command or parameter select.
14 NC No connection
15 NC No connection
16 GND Ground
17 TE Tearing effect output pin is used to synchronize MCU frame writing, activated by S/W command. When this pin is not activated (TE function OFF), this pin is GND level.
18 GND Ground

 

General Specifications

ItemDimensionUnit
Size 4.3 inch
Dot Matrix 480 × RGB × 272(TFT) dots
Module dimension 105.5(W) × 67.2(H) × 4.05(D) mm
Active area 95.04 × 53.856 mm
Dot pitch 0.198 × 0.198 mm
LCD type TFT, Normally Black, Transmissive
Viewing Angle 80/80/80/80
Aspect Ratio 16:9
TFT Driver IC NV3041A-01 or equivalent
TFT Interface 4 Line SPI
Backlight Type LED, Normally White
With/Without TP With RTP
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -30 +80
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolMinTypMaxUnit
Power supply for analog circuit VCI 3.0 3.3 3.6 V
Power supply for logic circuit IOVCC 1.65  1.8 3.3 V
Current for Driver IVCI - 30 45 mA
IIOVCC - 20 30 mA
Specifiche di prodotto
Brand Winstar
Size 4.3"
Risoluzione 480x272
Area Attiva (mm) 95.04x53.85
Colore Full Color
Interfaccia Display SPI
Display IC NV3041A-01
Angolo Visione IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Resistive
Temperatura O. (°C) -30~80
Connessione Display FPC for ZIF Connector
Nr. Pin 18
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 4.3"
Risoluzione 480x272
Area Attiva (mm) 95.04x53.85
Colore Full Color
Interfaccia Display SPI
Display IC NV3041A-01
Angolo Visione IPS
Sunlight Readable High 601~1200cd/m²
Frame No
Touch Panel Resistive
Temperatura O. (°C) -30~80
Connessione Display FPC for ZIF Connector
Nr. Pin 18
Passo Pin 0.5mm
Preferred - Not Preferred Preferred