Cerca
Italiano
Catalogo
    Menu Chiudi

    WF39-480128QD#007-FC

    TFT 3.9" 480x128, Bar Type, LCD + IC Controller, Interface MCU (Parallel) IC SSD1963 (8/16bit), 400cd/m², View direction 6H, Frame, Capacitive touch panel I2C interface (GG)
    Brand: Winstar
    Cod.: WF39-480128QD#007-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €75,40
    €67,80
    €63,80

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €75,40 IVA esclusa
    i h

    DESCRIPTION

    Extended model of 3.9" Bar TFT-LCD display built in with SSD1963 controller board plus a 36 pin-out connector which we called Winstar Q series Family. This model is featured with resolution 480x128 pixels and having projected capacitive touch screen (PCAP) on module, it supports digital 8080 family MPU 8bit/16bit interface (MCU interface). The capacitive touch panel IC is CYTMA568 or equivalent. Also, we already defined pin no. 33 ~ 36 as backlight supply on this SSD1963 controller board; therefore, there is no need to design extra backlight circuit. It is a color TFT module with PCAP; its luminance is 400 nits; contrast ratio of 500:1. It is an ideal upgrade solution for monochrome STN WH1602L1 to color TFT display with touch screen since both two items have a similar outline dimension of 122.0 x 44.0 mm (PCB outline).

     

    DRAWING

     

    SPECIFICATIONS

     

    Interface

    LCM PIN Definition

    PinSymbolFunction
    1 GND System round pin of the IC. Connect to system ground.
    2 VDD Power Supply : +3.3V
    3 BL_E Backlight control signal , H: On \ L: Off
    4 D/C Data/Command select
    5 WR Write strobe signal
    6 RD Read strobe signal
    7 DB0 Data bus
    8 DB1 Data bus
    9 DB2 Data bus
    10 DB3 Data bus
    11 DB4 Data bus
    12 DB5 Data bus
    13 DB6 Data bus
    14 DB7 Data bus
    15 DB8 Data bus (When select 8bits mode, this pin is NC)
    16 DB9 Data bus (When select 8bits mode, this pin is NC)
    17 DB10 Data bus (When select 8bits mode, this pin is NC)
    18 DB11 Data bus (When select 8bits mode, this pin is NC)
    19 DB12 Data bus (When select 8bits mode, this pin is NC)
    20 DB13 Data bus (When select 8bits mode, this pin is NC)
    21 DB14 Data bus (When select 8bits mode, this pin is NC)
    22 DB15 Data bus (When select 8bits mode, this pin is NC)
    23 NC No connect
    24 NC No connect
    25 CS Chip select
    26 RESET Hardware reset
    27 DISP_ON Display on/off control
    28 NC No connect
    29 NC No connect
    30 NC No connect
    31 NC No connect
    32 NC No connect
    33 VLED- VLED- for B/L LED inverter (GND)
    34 VLED- VLED- for B/L LED inverter (GND)
    35 VLED+ VLED+ for B/L LED inverter (+5V)
    36 VLED+ VLED+ for B/L LED inverter (+5V)

     

    PCAP PIN Definition

    PinSymbolFunction
    1 VSS Ground for analog circuit
    2 VDDT Power Supply : +3.0V
    3 SCL I2C clock inputI2C clock input
    4 NC No connect
    5 SDA I2C data input and output
    6 NC No connect
    7 /RST External Reset, Low is active
    8 NC No connect
    9 /INT External interrupt to the host
    10 VSS Ground for analog circuit

     

    General Specifications

    ItemDimensionUnit
    Size 3.9 inch
    Dot Matrix 480 × 128 × RGB (TFT) dots
    Module dimension 122.0 × 44.0 × 9.8(max) mm
    Active area 95.04 × 25.34 mm
    Dot pitch 0.066(W) × 0.198(H) mm
    LCD type TFT, Normally White, Transmissive
    View Direction 12o'clock
    Gray Scale Inversion Direction 6 o'clock
    Aspect Ratio Bar Type
    TFT Driver IC SSD1963
    TFT Interface Digital 8080 family MPU 8bit/16bit
    PCAP IC CYTMA568 Or Equal
    PCAP FW Version TBD
    Backlight Type LED,Normally White
    Color arrangement RGB-STRIPE
    Touch Panel PCAP
    Surface Glare

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -20 - +70 ℃
    Storage Temperature TST -30 - +80 ℃

     

    Electronical Characteristics

    Operating conditions: (CON3.Pin1=GND, Pin2=VDD)

    ItemSymbolMinTypMaxUnit
    Supply Voltage For LCM VDD 3.0 3.1 3.3 V
    Supply Current For LCM IDD — 200 — mA
    Supply Voltage For CTP VDDT 2.8 - 3.3 V
    Supply Current For CTP IDDT — 35 — mA

    Specifiche di prodotto
    Size 3.9"
    Resolution 480x128
    Active Area (mm) 95.04x25.34
    Color Full Color
    Display Interface MCU (Parallel)
    Display IC SSD1963
    View Angle TN
    Frame Yes
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection ZIF Connector
    Pin Nr. 36
    Pin Pitch 0.5mm
    Touch Panel IC Controller CYTMA568
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni