Cerca
Italiano
Catalogo
    Menu Chiudi

    WF20-240320BD#0P15-FC

    TFT 2" 240x320 Portrait LCD Panel, Interface MCU (Parallel/SPI) IC ST7789VI, 400cd/m², Wide View Angle (IPS), Capacitive touch panel I2C interface (GG with bonding OCA)
    Brand: Winstar
    Cod.: WF20-240320BD#0P15-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €36,10
    €32,50
    €30,50

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €36,10 IVA esclusa
    i h

    DRAWING

     

    SPECIFICATIONS

    Interface

    LCM PIN Definition

    NOSymbolFunction
    1 GND Ground
    2 NC(YU) No connection
    3 NC(XL) No connection
    4 NC(YD) No connection
    5 NC(XR) No connection
    6 NC No connection
    7 VDD Power supply
    8 VDDI Power Supply for I/O System.
    9 TE Tearing effect signal is used to synchronize MCU to frame memory
    writing.
    If not used, please let this pin open
    10 CSX Chip selection pin
    Low enable.
    High disable.
    11 DCX(SCL) (D/CX): This pin is used to select “Data or Command” in the parallel interface.
    DCX=’1’: display data or parameter.
    DCX=’0’: command data.
    (SCL): When SPI mode,This pin is used to be serial interface clock.
    12 WRX(D/CX) Display data/command selection
    Second Data lane in 2 data lane serial interface.
    (WRX): Write enable in MCU parallel interface.
    (D/CX): When 4-SPI mode,This pin in 4-line serial interface
    If not used, please fix this pin at VDDI or GND.
    13 RDX -Read enable in 8080 MCU parallel interface.
    -If not used, please fix this pin at VDDI or GND.
    14~29 DB0~DB15 Data bus line
    30 RESX System reset pin.
    signal is active low
    31 IM0 The MCU interface mode select.
    IM2IM1IM0MPU Interface ModeData pin
    0 0 0 80-8bit parallel I/F DB[7:0]
    0 0 1 80-16bit parallel I/F DB[15:0]
    0 1 0 80-9bit parallel I/F DB[8:0]
    0 1 1 80-18bit parallel I/F DB[17:0]
    1 0 1 3-line 9bit serial I/F SDA: in/out
    1 1 0 4-line 8bit serial I/F SDA: in/out
    32 IM1
    33 IM2
    34~35 DB16~DB17 Data bus line
    36 VLED- Cathode of LED backlight.
    37 VLED- Cathode of LED backlight.
    38 VLED+ Anode of LED backlight.
    39 NC(SDA) When SPI mode, This pin is SPI interface input/output pin.
    The data is latched on the rising edge of the SCL signal.
    If not used(NC), please fix this pin at VDDI or GND level.
    40 NC No connection
     

     

    PCAP PIN Definition

    PinSymbolFunction
    1 VSS Ground for analog circuit
    2 VDDT Power Supply :
    3 SCL I2C clock inputI2C clock input
    4 NC No connect
    5 SDA I2C data input and output
    6 NC No connect
    7 /RST External Reset, Low is active
    8 NC No connect
    9 /INT External interrupt to the host
    10 VSS Ground for analog circuit

     

    General Specifications

    ItemDimensionUnit
    Size 2 inch
    Dot Matrix 240 x RGB x 320(TFT) dots
    Module dimension 38.8(W) x 52.3(H) x3.8(D) mm
    Active area 30.60 x 40.80 mm
    Pixel Pitch 0.1275 x 0.1275 mm
    LCD type TFT, Normally Black, Transmissive
    TFT Interface MCU / SPI
    TFT Driver IC ST7789VI or Equivalent
    Viewing angle 80/80/80/80 (IPS)
    Aspect Ratio 3:4
    Backlight Type LED, Normally White
    PCAP Driver IC GT911 or equivalent
    PCAP Interface I2C
    PCAP FW V92
    PCAP  Resolution 240 * 320
    Touch Panel With PCAP
    Surface Glare

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -20 - 70 ℃
    Storage Temperature TST -30 - 80 ℃

     

    Electronical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage For Analog VDD - 2.4 3.3 3.6 V
    Interface Operation Voltage VDDI - 1.65 1.8 3.6 V
    Supply Current For LCM IDD VDD = VDDI
    = VCC=3.0V
    - 6.0 9.0 mA
    Supply PCAP VPCAP - 2.8 - 3.3 V
    IPCAP - - 8.0 12.0 mA


    Specifiche di prodotto
    Size 2"
    Resolution 240x320
    Active Area (mm) 30.60x40.80
    Color Full Color
    Display Interface MCU (Parallel/SPI)
    Display IC ST7789VI
    View Angle IPS
    Frame No
    Touch Panel Capacitive (Optical Bonding)
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 40
    Pin Pitch 0.5mm
    Touch Panel IC Controller GT911
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni