Cerca
Italiano
Catalogo
    Menu Chiudi

    WF123-1920720BL#0SPW8-FC

    TFT 12.3" 1920x720, Bar Type, Interface LVDS (50 pins), High Brightness 650cd/m², Wide View Angle (IPS), Super extended Temperature, Capacitive free board (USB/I2C)
    Brand: Winstar
    Cod.: WF123-1920720BL#0SPW8-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €208,90
    €188,00
    €176,70

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €208,90 IVA esclusa
    i h

    DESCRIPTION

    12.3 inch High Brightness 1920 x 720 IPS TFT-LCD module with projected capacitive touch panel (PCAP). This module supports 2-ch LVDS(Low-Voltage-Differential-Signaling)interface which becomes more popular for larger size of TFT LCD display. The LVDS interface is a great solution because of its high speed of data transmission while using low voltage and improved noise performance. The LVDS interface has several benefits for TFT displays. It is much less susceptible to EMI and crosstalk issues, and peripherals in need of high bandwidth, like high-definition graphics and fast frame rates, allowing the transmitting device to be located farther from the display. As to the capacitive touch panel of this module is built-in with ILI2511 IC which can communicate via USB or I2C interface, supports 10 detect points.

    It is adopted IPS panel which is having the advantage of wider view angle of Left:85 / Right:85 / Up:85 / Down:85 degree (typical value), contrast ratio 1100:1 (typical value), brightness 650 nits (typical value), glare surface panel. The supply voltage (VCC) is from 3V to 3.6V, typical value 3.3V. It can be operated at wide temperatures from -30℃ to +85℃ and storage temperatures from -40℃ to +85℃. If customers require wider storage temperatures up to -40℃ to +90℃, you can contact us. Please note, the thickness of these two modules is a little different 10.48mm vs 10.7mm.

     

    DRAWING

     

    SPECIFICATIONS

     

    Interface

    TFT LCD Module

    FPC connector is used for electronics interface.
    AORORA F31L-1A7H1-21050 , 50PIN

    Pin no.SymbolFunction
    1 GND Ground
    2 NC No connector
    3 VCC Digital Power
    4 VCC Digital Power
    5 GND Panel Power
    6 GND Panel Power
    7 NC No connector
    8 NC No connector
    9 GND Ground
    10 ORXIN0- Odd pixel negative LVDS differential clock input
    11 ORXIN0+ Odd pixel positive LVDS differential clock input
    12 ORXIN1- Odd pixel negative LVDS differential clock input
    13 ORXIN1+ Odd pixel positive LVDS differential clock input
    14 ORXIN2- Odd pixel negative LVDS differential clock input
    15 ORXIN2+ Odd pixel positive LVDS differential clock input
    16 ORXCLKIN- Odd pixel negative LVDS differential clock input
    17 ORXCLKIN+ Odd pixel positive LVDS differential clock input
    18 ORXIN3- Odd pixel negative LVDS differential clock input
    19 ORXIN3+ Odd pixel positive LVDS differential clock input
    20 ERXIN0- Even pixel negative LVDS differential clock input
    21 ERXIN0+ Even pixel positive LVDS differential clock input
    22 ERXIN1- Even pixel negative LVDS differential clock input
    23 ERXIN1+ Even pixel positive LVDS differential clock input
    24 ERXIN2- Even pixel negative LVDS differential clock input
    25 ERXIN2+ Even pixel positive LVDS differential clock input
    26 ERXCLKIN- Even pixel negative LVDS differential clock input
    27 ERXCLKIN+ Even pixel positive LVDS differential clock input
    28 ERXIN3- Even pixel negative LVDS differential clock input
    29 ERXIN3+ Even pixel positive LVDS differential clock input
    30 GND Ground
    31 NC No connector
    32 RESETB Global reset pin, active low.
    33 STBYB Standby mode, active low.
    34 CA3 Output signal to indicate self protection mode, when DE,HS,VS,DCLK, any of these signals is missing, it will become High. If using this pin, CA3 need to pulled low by an resistor,else , let it floating.
    35 SCL Serial interface clock input. (User folating)
    36 SDA Serial interface data input/output.(User folating)
    37 CSB Serial interface chip enable.(User folating)
    38 GND Power Ground
    39 GND Power Ground
    40 NC No connector
    41 LEDA LED power (Anode)
    42 LEDA LED power (Anode)
    43 LEDA LED power (Anode)
    44 NC No connector
    45 LEDK1 Cathode 1
    46 LEDK2 Cathode 2
    47 LEDK3 Cathode 3
    48 LEDK4 Cathode 4
    49 NTC_A NTC_Anode
    50 NTC_K NTC_Cathode
     

     

    PCAP PIN Definition

    PinSymbolFunction
    1 USB_VSS System ground
    2 USB_VDD 5V Power supply
    3 USB_D+ Data +
    4 USB_D- Data -
    5 VSS System ground
    6 SDA I2C data input and output
    7 SCL I2C clock input
    8 RST External Reset, Low is active
    9 INT External interrupt to the host
    10 VDDT 3.3 Power supply

     

    General Specifications

    ItemDimensionUnit
    Size 12.3 inch
    Pixel Number 1920 RGB (H) × 720(V) pixel
    Module dimension 364.0(H) × 175.0 (V) × 10.48 mm
    Active Area 292.032(H) × 109.512(V) mm
    Pixel Pitch 0.1521(H) × 0.1521 (V) mm
    LCD type TFT, Normally Black, Transmissive
    Viewing  Angle 85/85/85/85
    Backlight Type LED ,Normally White
    TFT Interface 2ch-LVDS
    PCAP IC ILI2511 or equivalent
    PCAP Interface USB (I2C available)
    PCAP FW Version V6.0.0.0.0.0.0.3
    Touch Panel Projected Capacitive Touch Screen, PCAP
    Surface Glare

     

    Absolute Maximum Ratings

    ItemSymbolMinTypMaxUnit
    Operating Temperature TOP -30 - +85 ℃
    Storage Temperature TST -40 - +85 ℃

     

    Electrical Characteristics

    ItemSymbolMin.Typ.Max.Unit
    Supply Voltage VCC 3 3.3 3.6 V
    Input signal voltage ViH VCC *0.7 - VCC V
    ViL 0 - VCC *0.3 V
    Current of power supply ICC - - 500 mA
    Inrush current IRUSH - - 2.0 A
    Supply CTP(USB) USB_VDD 5V 4.75 5.0 5.25 V
    I USB_VDD - 90 135 mA
    Supply CTP(I2C) VDDT 3.3 3.15 3.3 3.45 V
    IVDDT - 90 135 mA


    Specifiche di prodotto
    Size 12.3"
    Resolution 1920x720
    Active Area (mm) 292.03x109.51
    Color Full Color
    Display Interface LVDS
    Display IC No
    View Angle IPS
    Sunlight Readable High 601~1200cd/m²
    Frame No
    Touch Panel Capacitive free board (USB/I2C)
    O. Temperature (°C) -30~85
    Data Connection ZIF Connector
    Pin Nr. 50
    Pin Pitch 0.5mm
    Touch Panel IC Controller ILI2511
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni