Cerca
Italiano
Catalogo
    Menu Chiudi

    WF0299-268800AM#0P54-FC

    TFT 2.99" 268x800, Bar Type, Interface MIPI IC GC9503, 530cd/m², Wide View Angle (IPS), On-Cell Capacitive touch panel I2C interface (IC CST328)
    Brand: Winstar
    Cod.: WF0299-268800AM#0P54-FC
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €18,30
    €16,50
    €15,50

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €18,30 IVA esclusa
    i h

    RECOMMENDED ONLY AS SPARE PARTS

    For new projects please contact us at [email protected].

     

    DESCRIPTION

    WF0299-268800AM#0P54-FC is a portrait mode 2.99-inch stretched bar type TFT LCD with a resolution of 268x800 pixels and an On-Cell touch panel (capacitive touch). On-Cell technology involves embedding the touch sensor into the LCD module, either on the color filter substrate or between the polarizers. One of the main advantages of On-Cell touch technology is the reduced thickness, as the touch layer is directly integrated into the display panel, eliminating the need for an additional touch layer and thereby reducing the overall thickness of the display.

    The module comes with an On-Cell capacitive touch screen with a CST328 driver IC, supporting I2C interface and 2-point touch functionality. This integration enhances the user experience by enabling precise and responsive touch input, while the I2C interface facilitates easy communication with the device's control system.

    This On-Cell touch TFT display uses IPS technology, providing wider viewing angles of 80 degrees to the left, right, up, and down. It has a typical brightness of 530 nits and a contrast ratio of 1200:1. The TFT module integrates the GC9503 driver IC, which supports the MIPI DSI serial interface (2 lanes). The MIPI DSI interface offers advantages such as low power consumption, high transmission rates, support for multiple data-encoding formats, and reduced noise and interference.

    The module operates in temperatures ranging from -20℃ to +70℃, and can be stored in temperatures from -30℃ to +80℃. This bar type TFT module is ideal for use in electronic door locks, massage chair control panels, and other devices that require a stretched display screen.

     

    DRAWING

     

    SPECIFICATIONS

    Interface

    LCM PIN Definition

    Pin No.SymbolDescription
    1 NC No connection
    2 NC No connection
    3 GND Power ground
    4 NC No connection
    5 NC No connection
    6 GND Power ground
    7 DP1 MIPI-DSI data lane 1 posivtve input pin
    8 DN1 MIPI-DSI data lane 1 negtive input pin
    9 GND Power ground
    10 DP0 MIPI-DSI data lane 0 posivtve input pin
    11 DN0 MIPI-DSI data lane 0 negtive input pin
    12 GND Power ground
    13 CLKP MIPI-DSI data lane posivtve input pin
    14 CLKN MIPI-DSI data lane negtive input pin
    15 GND Power ground
    16 RST Reset signal(low active)
    17 TE Serves TE (Tearing Effect ) pin on MPU interface
    18 VLED- LED backlight cathode
    19 VLED- LED backlight cathode
    20 VLED+ LED backlight anode
    21 VLED+ LED backlight anode
    22 VI028 Analog power supply
    23 VI018 Power supply for the logic power and I/O circuit
    24 CTP_SDA TP-SDA
    25 CTP_SCL TP-SCL
    26 CTP_EINT TP-EINT
    27 CTP_VDD TP-VCC
    28 NC No connection
    29 CTP_RST TP-RESET
    30 GND Power ground

     

    General Specifications

    ItemDimensionUnit
    Size 2.99” inch
    Dot Matrix 268 x RGB x 800(TFT) dots
    Module dimension 26.52 (W) x 78.2 (H) x 2.46 (D) mm
    Active area 24.12 x 72.0 mm
    Pixel Pitch 0.09 x 0.09 mm
    LCD type TFT, Normally Black, Transmissive
    TFT Interface 2-Lanes MIPI
    TFT Driver IC GC9503
    Viewing angle 80/80/80/80
    PCAP Driver IC CST328
    PCAP Interface I2C
    PCAP FW Version 1.0.3
    PCAP Resolution 268*820
    Backlight Type LED, Normally White
    Touch Panel With PCAP
    Surface Glare

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Power Supply voltage 1 VI028~GND -0.3 +4.6 V
    Power Supply voltage 2 VI018~GND -0.3 +4.6 V
    Logic Input Voltage Range VIN -0.3 VI018+0.5 V
    Logic Output Voltage Range VO -0.3 VI018+0.5 V

     

    Electronical Characteristics

    ItemSymbolMinTypMaxUnit
    Supply voltage for analog circuit VI028 2.6 2.8 3.6 V
    Working current for VI028 - - 43.0 65.0 mA
    Supply voltage for logic circuit VI018 1.65 1.8 3.3 V
    Input voltage 'H' level VIH 0.7*VI018 - VI018 V
    Input voltage 'L' level VIL GND - 0.3*VI018 V
    Output voltage 'H' level VOH 0.8*VI018 - VI018 V
    Output voltage 'L' level VOL GND - 0.2*VI018 V
    Supply CTP CTP_VDD 2.65 2.8 3.3 V
    CTP_IDD - 7.0 11.0 mA
    Specifiche di prodotto
    Size 2.99"
    Resolution 268x800
    Active Area (mm) 24.12x72.00
    Color Full Color
    Display Interface MIPI
    Display IC GC9503
    View Angle IPS
    Frame No
    Touch Panel Capacitive
    O. Temperature (°C) -20~70
    Data Connection BTB Connector
    Pin Nr. 30
    Pin Pitch 0.4mm
    Touch Panel IC Controller CST328
    Preferred - Not Preferred Not Preferred
    Date Notice Link/Description
    2025/10/31 EOL

    Discontinuation of the Hannstar panel for Winstar TFT WF0299-268800AM

     

    For more details, please contact us @ [email protected]

    You are running a Trial version of Nop Attachments
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni