Cerca
Italiano
Catalogo
    Menu Chiudi

    WEO20636W#AA3N00000-FC

    PMOLED 2.5" Graphic 206x36, White color, COG, 3V, Interface SPI/I2C , Anti-Glare
    Brand: Winstar
    Cod.: WEO20636W#AA3N00000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    Prezzo
    €13,60
    €12,20
    €11,50

    Per quantità maggiori di 24pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €13,60 IVA esclusa
    i h

    DESCRIPTION

    Discover Winstar's first 2.55-inch OLED module with a resolution of 206x36 dots. This COG (Chip on Glass) graphic OLED display features an outline dimension of 70.77 x 15.14 mm and an active area of 63.84 x 11.14 mm, delivering precise visual representation.

    Key Features:

    • Integrated IC: SSD1362 IC supports I2C and 3-wire/4-wire SPI interfaces.
    • Power Supply: Logic voltage ranges from 1.65V to 3.5V; display power operates at 10V to 12.5V (typical 12V) with a 1/36 duty cycle.
    • Grayscale Support: 4-bit (16-level) grayscale enhances image depth and detail.
    • Contrast Ratio: High 10,000:1 ratio ensures vivid image clarity.
    • Temperature Range: Operational from -40°C to +80°C, suitable for diverse environments.

    Versatile Applications:

    The WEO20636W#AA3N00000-FC OLED display is ideal for applications including portable DAC (Digital-to-Analog Converter) headphone amplifiers, portable power stations, and radio applications. Its compact size and exceptional visual clarity make it suitable for mobile devices, industrial equipment, medical devices, and consumer electronics. The display's COG structure and compatibility with SPI and I2C interfaces facilitate seamless integration into different digital environments.

    Enhanced Visual Performance:

    Whether enhancing user interfaces in handheld devices or providing critical visual feedback in industrial settings, the WEO20636W#AA3N00000-FC ensures reliable performance and durability across a wide temperature range.

     

    DRAWING

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.
    2 VCOMH COM signal deselected voltage level.
    A capacitor should be connected between this pin and VSS.
    No external power supply is allowed to connect to this pin.
    3 VP This pin is the segment pre-charge voltage reference pin.
    A capacitor should be connected between this pin and VSS.
    No external power supply is allowed to connect to this pin.
    4 VSL This is a reserved pin. It should be connected to VLSS externally.
    5 VLSS Analog system ground pin. It must be connected to external ground.
    6 VDD VDD can be supplied externally (within the range of 1.65V to 2.6V) or regulated internally from VCI when VCI is >2.6V.A capacitor should be connected between VDD and VSS under all circumstances.
    7 VCI Low voltage power supply.
    VCI must always be equal to or higher than VDD and VDDIO.
    8 VDDIO Power supply for interface logic level. It should match with the MCU interface voltage level and must be connected to external source.
    9 CS# This pin is the chip select input connecting to the MCU.
    The chip is enabled for MCU communication only when CS# is pulled Low (active Low).In I2C mode, this pin must be connected to VSS.
    10 RES# This pin is reset signal input.
    When the pin is pulled Low, initialization of the chip is executed.
    Keep this pin pull HIGH during normal operation.
    11 D/C# This pin is Data/Command control pin connecting to the MCU.
    When the pin is pulled HIGH, the data will be interpreted as data.
    When the pin is pulled LOW, the data will be transferred to a command register.
    In I2C mode, this pin acts as SA0 for slave address selection.
    When 3-wire serial interface is selected, this pin must be connected to VSS.
    12 D0 These pins are bi-directional data bus connecting to the MCU data bus.
    Unused pins are recommended to tie Low. When serial interface mode is selected,D0 will be the serial clock input: SCLK;D1 will be the serial data input: SID. When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
    13 D1
    14 D2
    15 BS0 MCU bus interface selection pins.
    BS[1:0]Interface
    00 4-Wire SPI
    01 3-Wire SPI
    10 I2C
    16 BS1

    17
    VSS Ground pin.
    18 IREF When external IREF is used, a resistor should be connected between this pin and VSS to maintain current of around 18.75uA.
    When internal IREF is used, this pin should be kept NC.
    19~20 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin. It is supplied by external high voltage source.

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 206 x 36 Dots -
    Module dimension 70.77 x 15.14 x 2.01 mm
    Active Area 63.84 x 11.14 mm
    Pixel Size 0.29 x 0.29 mm
    Pixel Pitch 0.31 x 0.31 mm
    Display Mode Passive Matrix
    Display Color White
    Drive Duty 1/36 Duty
    Gray Scale 4 Bits
    IC SSD1362
    Interface 3-Wire SPI、4-Wire SPI、I2C
    Size 2.55 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage VDD -0.5 2.75 V
    Supply Voltage VCI -0.3 5.5 V
    Supply Voltage VDDIO -0.5 5.5 V
    Supply Voltage VCC 7 21 V
    Operating Temperature TOP -40 +80 °C
    Storage Temperature TSTG -40 +85 °C

     

    Electrical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Display VCC - 10.0 12.0 12.5 V
    Low voltage power supply VCI - 1.65 - 3.5 V
    Power supply for I/O pins VDDIO - 1.65 - VCI V
    Logic Supply Voltage VDD - 1.65 - 2.6 V
    High Level Input VIH - 0.8×VDDIO - - V
    Low Level Input VIL - - - 0.2×VDDIO V
    High Level Output VOH - 0.9×VDDIO - - V
    Low Level Output VOL - - - 0.1×VDDIO V
    Display 50% Pixel on ICC VCC =12V - 25 35 mA
    Specifiche di prodotto
    Size 2.5"
    Resolution 206x36
    Active Area (mm) 63.84x11.14
    Dot Size 0.29x0.29
    Polarizer Anti-glare
    Color White
    Power supply 3V
    Display Interface SPI/I2C
    Display IC SSD1362
    Constructive Structure COG
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection FPC for ZIF Connector
    Pin Nr. 20
    Pin Pitch 0.5mm
    Preferred - Not Preferred Preferred
    You are running a Trial version of Nop Attachments
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni