Cerca
Italiano
Catalogo
    Menu Chiudi

    WEO12864L#ZP3N00000-FC

    PMOLED 0.96" Graphic 128x64, Rectangular + Circular Knob COG, Yellow color, 3V, Interface SPI,I2C, Glare
    Brand: Winstar
    Cod.: WEO12864L#ZP3N00000-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €19,50
    €17,50
    €16,50
    €16,10

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €19,50 IVA esclusa
    i h

    DESCRIPTION

    It's a 0.96 inch 128x64 dots COG type OLED display. This OLED Encoder module is built in with SSD1306 IC; it supports 4-line SPI and I2C interface, supply voltage (VCI) minimum 1.65V, maximum 3.3V, 1/64 driving duty. This OLED features a rotary switch which is ideal for applications that require a control knob such as smart home applications, intelligent technology devices, audio system, etc. Operated temperature from -20℃ to +70℃; storage temperature ranges from -30℃ to +80℃.

     

    DRAWING

    Ø 0.96" 128×64 OLED Knob - WEO012864Z

     

     

    SPECIFICATIONS

     

    Interface Pin Function

    Pin No.SymbolDescription
    1 VSS Ground pin.
    2 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
    3 VCOMH COM signal deselected voltage level.
    A capacitor should be connected between this pin and VSS.
    4 VCI Power supply pin for core logic operation
    5 NC No connection
    6 BS1 MCU bus interface selection pins.
    Select appropriate logic setting as described in the following table.
     BS1
    I2C 1
    4-wire Serial 0
    Note
    (1) 0 is connected to VSS
    (2) 1 is connected to VCI
    7 IREF This is segment output current reference pin.
    When external IREF is used, a resistor should be connected between this pin and VSS to maintain the IREF current at a maximum of 30uA.
    8 CS# This pin is the chip select input. (active LOW).
    9 RES# This pin is reset signal input.
    When the pin is pulled LOW, initialization of the chip is executed.
    Keep this pin HIGH during normal operation.
    10 D/C# When 4-wire serial interface is selected, this pin is Data/Command control pin connecting to the MCU.
    In I2C mode, this pin acts as SA0 for slave address selection.
    11 D0 These pins are bi-directional data bus connecting to the MCU data bus.
    When serial interface mode is selected, D0 will be the serial clock input: SCLK; D1 will be the serial data input: SDIN and D2 should be kept NC.
    When I2C mode is selected, D2, D1 should be tied together and serve as SDAout, SDAin in application and D0 is the serial clock input, SCL.
    12 D1
    13 D2
    14 NC No connection
    15 NC No connection
    16 NC No connection
    17 VCC Power supply for panel driving voltage. This is also the most positive power voltage supply pin.
    18 VSS Ground pin.

     

    Encoder PIN Definition

    No.SymbolFunction
    1 FSW_A Encoder terminal signal-A
    2 FSW_B Encoder terminal signal-B
    3 FSW_C Encoder terminal signal-C
    4 FSW_D Ground

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 128 x 64 Dots Dots
    Module dimension Ø39.4 x 24.8 mm
    Active Area 21.74 x 10.86 mm
    Pixel Size 0.148 x 0.148 mm
    Pixel Pitch 0.17 x 0.17 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/64
    IC SSD1326
    Interface 4-wire SPI,I2C
    Size 0.96 inch

     

    Absolute Maximum Ratings

    ItemSymbolMinMaxUnit
    Supply Voltage VCI -0.3 4.0 V
    Supply Voltage for Display VCC 0 15 V
    Operating Temperature TOP -20 +70 °C
    Storage Temperature TST -30 +80 °C

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage VCI - 1.65 3.0 3.3 V
    Supply Voltage for Display VCC - 6 10 10.5 V
    Input High Volt. VIH - 0.8xVCI - - V
    Input Low Volt. VIL - - - 0.2xVCI V
    Output High Volt. VOH Iout = 100uA 0.9xVCI - - V
    Output Low Volt. VOL Iout = 100uA - - 0.1xVCI V
    Operating Current for VCC (VCC Supplied Externally) ICC VCC =10V - 5 10 mA


    Specifiche di prodotto
    Size 0.96"
    Resolution 128x64
    Active Area (mm) 21.74x10.86
    Dot Size 0.15x0.15
    Polarizer Glare
    Color Yellow
    Power supply 3V
    Display Interface SPI/I2C
    Display IC SSD1326
    Constructive Structure Circular Knob COG
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 18
    Pin Pitch 0.5mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni