Cerca
Italiano
Catalogo
    Menu Chiudi

    WEO12832W#RP3N00000-FC

    PMOLED 0.91" Graphic 128x32, White color, COG, 3V, Interface l2C (FPC per Soldering), SH1106 IC, Glare
    Brand: Winstar
    Cod.: WEO12832W#RP3N00000-FC
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €5,60
    €5,00
    €4,70
    €4,60

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €5,60 IVA esclusa
    i h

    DESCRIPTION

    WEO12832W#RP3N00000#-FC is a popular 0.91-inch COG graphic OLED module in the market. This module features a resolution of 128x32 dots and integrates the SH1106 IC, supporting an I2C interface. The IC also facilitates internal power boost and external power supply. With outline dimensions of 30.0 × 11.5 mm and an active area of 22.384 × 5.584 mm, the module is very lightweight due to its COG structure, measuring just 1.26 mm in thickness.

    The logic power supply voltage ranges from 1.65V to 3.3V, with a typical value of 3.0V, and operates with a duty cycle of 1/32. Additionally, the module features a wide temperature range, reliably operating from -40℃ to +80℃, with a storage temperature range of -40℃ to +85℃.

    This module is particularly suitable for various applications requiring compact and lightweight OLED displays. It is ideal for integrating into devices such as voice recorder, charging cables with embedded OLED displays and keychain lights featuring OLED displays, where space and visual clarity are paramount.

     

    DRAWING

     

    SPECIFICATIONS

    Interface Pin Function

    No.SymbolFunction
    1 C1N Connect to charge pump capacitor.
    These pins are not used and should be disconnected when Vpp is supplied externally.
    2 C1P
    3 C2P
    4 C2N
    5 VDD2 Power supply pad for Power supply for charge pump circuit.
    This pin should be disconnected when VPP is supplied externally
    6 NC No connection
    7 VSS Ground.
    8 VDD1 Power supply input
    9 RES# This is a reset signal input pad. When RES is set to “L”, the settings are initialized. The reset operation is performed by the RES signal level.
    10 SCL When the I2C interface is selected, D0 serves as the serial clock input pad (SCL) and D1 serves as the serial data input pad (SDAI).
    11 SDA
    12 IREF This is a segment current reference pad. A resistor should be connected between this pad and VSS. Set the current at 18.75uA.
    13 VCOMH This is a pad for the voltage output high level for common signals.
    A capacitor should be connected between this pad and VSS.
    14 VPP OLED panel power supply. Generated by internal charge pump.
    Connect to capacitor. It could be supplied externally.

     

    General Specification

    ItemDimensionUnit
    Dot Matrix 128 × 32 Dots
    Module dimension 30.0 × 11.5 × 1.26 mm
    Active Area 22.384 × 5.584 mm
    Pixel Size 0.152 × 0.152 mm
    Pixel Pitch 0.175 × 0.175 mm
    Display Mode Passive Matrix
    Display Color White
    Drive Duty 1/32 Duty
    IC SH1106
    Interface I2C
    Size 0.91 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VDD1 -0.3 3.6 V
    Power supply for charge pump circuit VDD2 -0.3 4.8 V
    Supply Voltage for Display VPP -0.3 14.5 V
    Operating Temperature TOP -40 +80 °C
    Storage Temperature TSTG -40 +85 °C

     

    Electronical Characteristics

    DC Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VDD1 - 1.65 3.0 3.3 V
    Supply Voltage for Display
    (Supplied Externally)
    VPP - 6.4 7.25 8 V
    Charge Pump Regulator Supply Voltage VDD2 - 2.9 - 4.2 V
    Charge Pump Output Voltage for Display (Generated by Internal DC/DC) Charge Pump
    VPP
    - 7.0 7.4 - V
    Input High Volt. VIH - 0.8×VDD1 - VDD1 V
    Input Low Volt. VIL - VSS - 0.2×VDD1 V
    Output High Volt. VOH - 0.8×VDD1 - VDD1 V
    Output Low Volt. VOL - VSS - 0.2×VDD1 V
    Operating Current for VPP (VPP Supplied Externally) IPP VPP =7.25V - 8 12 mA
    Display 50% Pixel on (VPP Generated by Internal DC/DC) IDD2 - - 15 25 mA
    Specifiche di prodotto
    Size 0.91"
    Resolution 128x32
    Active Area (mm) 22.38x5.58
    Dot Size 0.15x0.15
    Polarizer Glare
    Color White
    Power supply 3V
    Display Interface I2C
    Display IC SH1106
    Constructive Structure COG
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection FPC for Soldering
    Pin Nr. 14
    Pin Pitch 0.62mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni