Cerca
Italiano
Catalogo
    Menu Chiudi

    WAA0290BA8#A2N4AA-FC

    E-Paper 2.9" 296x128, Color Black on White, Interface SPI, Capacitive Touch Panel I2C interface (IC FT6336U) with Front-Light
    Brand: Winstar
    Cod.: WAA0290BA8#A2N4AA-FC

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    Prezzo
    €36,60
    €32,90

    Per quantità maggiori di 9pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €36,60 IVA esclusa
    i h

    DESCRIPTION

    WAA0290BA8#A2N4AA-FC is a 2.9" Electronic Paper Display (EPD) with a capacitive touch panel, a front-light panel, and a reference system design. The display is capable of showing images in 1-bit black and white with full display capabilities. The 2.9-inch active area has a resolution of 296x128 pixels.

    This module is a TFT-array-driven electrophoresis display with integrated circuits, including a gate driver, source driver, MCU interface, timing controller, oscillator, DC-DC converter, SRAM, LUT, and VCOM. The module is suitable for use in portable electronic devices, such as Electronic Shelf Label (ESL) systems.

    Features:

    • 296x128 pixel display
    • High contrast
    • High reflectance
    • Ultra-wide viewing angle
    • Ultra-low power consumption
    • Pure reflective mode
    • Bi-stable display
    • Commercial temperature range
    • Supports both landscape and portrait modes
    • Hard-coat, anti-glare display surface
    • Ultra-low current consumption in deep sleep mode
    • On-chip display RAM
    • Waveforms can be stored in on-chip OTP memory or written by the MCU
    • Serial Peripheral Interface (SPI) support
    • On-chip oscillator
    • On-chip booster and regulator control for generating VCOM, Gate, and Source driving voltages
    • I2C master interface for reading external temperature sensor
    • Built-in temperature sensor

     

    DRAWING

    SPECIFICATIONS

    General Specifications

    ParameterSpecificationsUnit
    Screen Size 2.9 Inch
    Display Resolution 296(H)×128(V) Pixel
    Active Area 29.056(H)×66.896(V) mm
    Pixel Pitch 0.227×0.226 mm
    Pixel Configuration Rectangle  
    Outline Dimension 36.7(H) × 79.0 (V) × 2.15(D) mm
    Module Weight 5.5±0.5 g

     

    Electrical Characteristics

    Absolute Maximum Ratings

    ParameterSymbolRatingUnit
    Logic supply voltage VCI -0.5 to +4.0 V
    Logic Input voltage VIN -0.5 to VCI +0.5 V
    Logic Output voltage VOUT -0.5 to VCI +0.5 V
    Operating Temp range TOPR 0 to +50 ºC
    Storage Temp range TSTG -25 to+70 ºC
    Optimal Storage Temp TSTGo 23±2 ºC
    Optimal Storage Humidity HSTGo 55±10 %RH

     

    Input /Output Pin Assignment

    No.NameI/ODescription
    1 NC   Do not connect with other NC pins
    2 GDR O N-Channel MOSFET Gate Drive Control
    3 RESE I Current Sense Input for the Control Loop
    4 NC NC Do not connect with other NC pins
    5 VSH2 C Positive Source driving voltage(Red)
    6 TSCL O I2C Interface to digital temperature sensor Clock pin
    7 TSDA I/O I2C Interface to digital temperature sensor Data pin
    8 BS1 I Bus Interface selection pin
    9 BUSY O Busy state output pin
    10 RES# I Reset signal input. Active Low.
    11 D/C# I data /Command control pin
    12 CS# I Chip select input pin
    13 SCL I Serial Clock pin (SPI)
    14 SDA I/O Serial Data pin (SPI)
    15 VDDIO P power Supply for interface logic pins It should be connected with VCI
    16 VCI P Power Supply for the chip
    17 VSS P Ground
    18 VDD C Core logic power pin VDD can be regulated internally from VCI. A capacitor should be connected between VDD and VSS
    19 VPP P FOR TEST
    20 VSH1 C Positive Source driving voltage
    21 VGH C Power Supply pin for Positive Gate driving voltage and VSHI
    22 VSL C Negative Source driving voltage
    23 VGL C Power Supply pin for Negative Gate driving voltage VCOM and VSL
    24 VCOM C VCOM driving voltage
     

    Note: I: Input, O: Output, P: Power, D: Dummy, S: Shorted line, M: Mark, PI: Power input, PO: Power output, I/O: Input / Output, PS: Power Setting, C: Capacitor pin.

    Specifiche di prodotto
    Size 2.9"
    Resolution 296x128
    Active Area (mm) 29.05x66.89
    Dot Size 0.22x0.22
    Color Black on White
    Display Interface SPI
    Display IC SSD1680
    O. Temperature (°C) 0~50
    Data Connection FPC for ZIF Connector
    Pin Nr. 24
    Pin Pitch 0.5mm
    Preferred - Not Preferred Not Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni