Menu
Cerca
Filters
Close
Menu

WAA0154BA4#A2N1AA-FC

Immagine di WAA0154BA4#A2N1AA-FC Immagine di WAA0154BA4#A2N1AA-FC
E-paper 1.54" 200x200, Color Black on White, Interface SPI with Front-Light 1.54"

DESCRIPTION

WAA0154BA4#A2N1AA-FC is an Electronic Paper Display (EPD) with a front light panel. The 1.54" active area contains 200 x 200 pixels and supports 1-bit black-and-white display with full display capabilities. The integrated circuit includes a gate buffer, source buffer, interface, timing controller logic, oscillator, DC-DC converter, SRAM, LUT, VCOM, and borders for each panel.

Features

  • High contrast
  • High reflectance
  • Ultra-wide viewing angle
  • Ultra-low power consumption
  • Pure reflective mode
  • Bi-stable
  • Commercial temperature range
  • Supports both landscape and portrait modes
  • Anti-glare hard-coated front surface
  • Low current sleep mode
  • On-chip display RAM
  • Serial Peripheral Interface (SPI) available
  • On-chip oscillator
  • On-chip booster and regulator control for generating VCOM, Gate, and Source driving voltages
  • I2C master interface for reading an external temperature sensor
  • Front light panel with 3 LEDs in series
  • Available in COG package with IC thickness of 300µm

DRAWING

SPECIFICATIONS

General Specifications

ParameterSpecificationsUnit
Screen Size 1.54 Inch
Display Resolution 200(H)×200(V) Pixel
Active Area 27.0(H)×27.0(V) mm
Pixel Pitch 0.14×0.14 mm
Pixel Configuration Square  
Outline Dimension 31.80(H)×37.32 (V) ×1.85(D) mm
Module Weight 3.15±0.5 g

 

Electrical Characteristics

Absolute Maximum Ratings

ParameterSymbolRatingUnit
Logic supply voltage VCI -0.5 to +4.0 V
Logic Input voltage VIN -0.5 to VCI +0.5 V
Logic Output voltage VOUT -0.5 to VCI +0.5 V
Operating Temp range TOPR 0 to +50 ºC
Storage Temp range TSTG -25 to+70 ºC
Optimal Storage Humidity HSTGo 55±10 %RH

 

Interface

Input /Output Pin Assignment

No.NameI/ODescription
1 NC   Do not connect with other NC pins
2 GDR O N-Channel MOSFET Gate Drive Control
3 RESE I Current Sense Input for the Control Loop
4 NC NC Do not connect with other NC pins
5 VSH2 C Positive Source driving voltage(Red)
6 TSCL O I2C Interface to digital temperature sensor Clock pin
7 TSDA I/O I2C Interface to digital temperature sensor Data pin
8 BS1 I Bus Interface selection pin
9 BUSY O Busy state output pin
10 RES# I Reset signal input. Active Low.
11 D/C# I Data /Command control pin
12 CS# I Chip select input pin
13 SCL I Serial Clock pin (SPI)
14 SDA I/O Serial Data pin (SPI)
15 VDDIO P Power Supply for interface logic pins It should be connected with VCI
16 VCI P Power Supply for the chip
17 VSS P Ground
18 VDD C Core logic power pin VDD can be regulated internally from VCI. A capacitor should be connected between VDD and VSS
19 VPP P FOR TEST
20 VSH1 C Positive Source driving voltage
21 VGH C Power Supply pin for Positive Gate driving voltage and VSH1
22 VSL C Negative Source driving voltage
23 VGL C Power Supply pin for Negative Gate driving voltage VCOM and VSL
24 VCOM C VCOM driving voltage
SKU: WAA0154BA4#A2N1AA-FC
Brand: Winstar
Disponibile: Si
Si tratta dela prima recensione per questo prodotto
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
Prezzo
€14,80
€10,90

Per quantita’ maggiori di 25pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

€14,80 IVA esclusa

DESCRIPTION

WAA0154BA4#A2N1AA-FC is an Electronic Paper Display (EPD) with a front light panel. The 1.54" active area contains 200 x 200 pixels and supports 1-bit black-and-white display with full display capabilities. The integrated circuit includes a gate buffer, source buffer, interface, timing controller logic, oscillator, DC-DC converter, SRAM, LUT, VCOM, and borders for each panel.

Features

  • High contrast
  • High reflectance
  • Ultra-wide viewing angle
  • Ultra-low power consumption
  • Pure reflective mode
  • Bi-stable
  • Commercial temperature range
  • Supports both landscape and portrait modes
  • Anti-glare hard-coated front surface
  • Low current sleep mode
  • On-chip display RAM
  • Serial Peripheral Interface (SPI) available
  • On-chip oscillator
  • On-chip booster and regulator control for generating VCOM, Gate, and Source driving voltages
  • I2C master interface for reading an external temperature sensor
  • Front light panel with 3 LEDs in series
  • Available in COG package with IC thickness of 300µm

DRAWING

SPECIFICATIONS

General Specifications

ParameterSpecificationsUnit
Screen Size 1.54 Inch
Display Resolution 200(H)×200(V) Pixel
Active Area 27.0(H)×27.0(V) mm
Pixel Pitch 0.14×0.14 mm
Pixel Configuration Square  
Outline Dimension 31.80(H)×37.32 (V) ×1.85(D) mm
Module Weight 3.15±0.5 g

 

Electrical Characteristics

Absolute Maximum Ratings

ParameterSymbolRatingUnit
Logic supply voltage VCI -0.5 to +4.0 V
Logic Input voltage VIN -0.5 to VCI +0.5 V
Logic Output voltage VOUT -0.5 to VCI +0.5 V
Operating Temp range TOPR 0 to +50 ºC
Storage Temp range TSTG -25 to+70 ºC
Optimal Storage Humidity HSTGo 55±10 %RH

 

Interface

Input /Output Pin Assignment

No.NameI/ODescription
1 NC   Do not connect with other NC pins
2 GDR O N-Channel MOSFET Gate Drive Control
3 RESE I Current Sense Input for the Control Loop
4 NC NC Do not connect with other NC pins
5 VSH2 C Positive Source driving voltage(Red)
6 TSCL O I2C Interface to digital temperature sensor Clock pin
7 TSDA I/O I2C Interface to digital temperature sensor Data pin
8 BS1 I Bus Interface selection pin
9 BUSY O Busy state output pin
10 RES# I Reset signal input. Active Low.
11 D/C# I Data /Command control pin
12 CS# I Chip select input pin
13 SCL I Serial Clock pin (SPI)
14 SDA I/O Serial Data pin (SPI)
15 VDDIO P Power Supply for interface logic pins It should be connected with VCI
16 VCI P Power Supply for the chip
17 VSS P Ground
18 VDD C Core logic power pin VDD can be regulated internally from VCI. A capacitor should be connected between VDD and VSS
19 VPP P FOR TEST
20 VSH1 C Positive Source driving voltage
21 VGH C Power Supply pin for Positive Gate driving voltage and VSH1
22 VSL C Negative Source driving voltage
23 VGL C Power Supply pin for Negative Gate driving voltage VCOM and VSL
24 VCOM C VCOM driving voltage
Specifiche di prodotto
Brand Winstar
Size 1.54"
Risoluzione 200x200
Area Attiva (mm) 27.00x27.00
Dot Size 0.14x0.14
Colore Black on White
Interfaccia Display SPI
Display IC SSD1681
Temperatura O. (°C) 0~50
Connessione Display FPC for ZIF Connector
Nr. Pin 24
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 1.54"
Risoluzione 200x200
Area Attiva (mm) 27.00x27.00
Dot Size 0.14x0.14
Colore Black on White
Interfaccia Display SPI
Display IC SSD1681
Temperatura O. (°C) 0~50
Connessione Display FPC for ZIF Connector
Nr. Pin 24
Passo Pin 0.5mm
Preferred - Not Preferred Preferred
Prodotti correlati
Immagine di WAA0154BA4#A2N0AA-FC

WAA0154BA4#A2N0AA-FC

E-paper 1.54" 200x200, Color Black on White, Interface SPI
Da €7,20 IVA esclusa
Immagine di NE015-N001GD

NE015-N001GD

E-paper 1.54" 200x200, Color Black on White, Interface SPI, Fast refresh (0.82sec full / 0.3sec partial) with Front-Light 1.54" (30.40x39.52mm)
Da €18,50 IVA esclusa
Immagine di MOLEX_52437-2433

MOLEX_52437-2433

ZIF Connector 24 pins, 0.5mm pitch, Bottom contact
Da €3,00 IVA esclusa
Immagine di CNT5231XXXXXXXXXXX00

CNT5231XXXXXXXXXXX00

ZIF Connector 24 pins, 0.5mm pitch, Top contact
Da €2,40 IVA esclusa
Immagine di 8.02A0.024200

8.02A0.024200

ZIF Connector 24 pins, 0.5mm pitch, Dual contact side
Da €2,70 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Prodotti in Vetrina
Copyright © 2025 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy