Cerca
Italiano
Catalogo
    Menu Chiudi
    TFT 1.45" 412x412, Round LCD Panel, Interface MCU (QSPI), Wide View Angle (IPS), 450 cd/m2, Standard Temp.
    Cod.: NT015RN001MI
    Prezzi per quantità
    Quantità
    1+
    5+
    Prezzo
    €20,30
    €18,20

    Per quantità maggiori di 9pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €20,30 IVA esclusa
    i h

    DRAWING

     

    SPECIFICATIONS

    General Specifications

    ItemSpecificationUnit
    LCD Type TFT / Transmissive / Normally Black /
    Size 1.45 Inch
    Viewing Direction Full Viewing Angle O'Clock
    Gray Scale Inversion Direction - O'Clock
    Active Area (W x H) 39.36 x 41.53 x 1.56 mm
    Pixel Pitch 0.0897 x 0.0897 mm
    Number of Dots 412 (RGB) x 412 mm
    Driver IC SPD2010 /
    Backlight Type 3-chip LED /
    Interface Type QSPI /
    Color Depth 16.7M /
    Pixel Configuration R.G.B Vertical Stripe /
    Top Polarizer Surface Treatment Anti-glare /
    Input Voltage 2.8 V
    With/Without TSP Without TSP /
    TP Surface Treatment - /
    Weight 4.3 g

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Power Supply Voltage VCC -0.3 3.3 V
    IOVCC -0.3 3.3 V
    Operating Temperature TOP -20 +70 ℃
    Storage Temperature TST -30 +80 ℃

     

    Electrical Characteristics

    ParameterSymbolMin.Typ.Max.Unit
    Power Supply Voltage VCC 2.5 2.8 3.3 V
    IOVCC 1.65 1.8 3.3 V
    Supply Current for VCC ICC - TBD - mA
    Gate Driver "H" Level VGH 6 - 15 V
    Gate Driver "L" Level VGL -14 - -5 V

     

    Interface Description

    Pin No.SymbolDescription
    1 NC No connection.
    2 D3 Serial input signal in QSPI serial data interface.
    3 D2 Serial input signal in QSPI serial data interface.
    4 D1 Serial input signal in QSPI serial data interface.
    5 D0 (SDA) Serial input signal in QSPI serial data interface.
    6 SCL This pin is used to be serial interface clock.
    7 CS Chip selection pin; Low enable, high disable.
    8 RESET Reset pin, active low.
    9 TE Tearing effect signal is used to synchronize MCU to frame memory writing.
    10 GND Ground.
    11 LEDK Cathode for LED backlight.
    12 LEDK Cathode for LED backlight.
    13 LEDA Anode for LED backlight.
    14 VCC Power supply.
    15 VCC Power supply.
    16 GND Ground.
    17 NC No connection.
    18 NC No connection.
    19 NC No connection.
    20 NC No connection.
    21 GND Ground.
    22 IOVCC Power supply for I/O system.
    23 IOVCC Power supply for I/O system.
    24 NC No connection.
    Specifiche di prodotto
    Size 1.45"
    Resolution 412x412
    Active Area (mm) 36.96x36.96
    Color Full Color
    Display Interface MCU (QSPI)
    Display IC SPD2010
    View Angle IPS
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -20~70
    Data Connection BTB Connector
    Pin Nr. 24
    Pin Pitch 0.4mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni