Cerca
Italiano
Catalogo
    Menu Chiudi
    PMOLED 1.28" Graphic 128x64, White, COG + PCB, 3~5V, Interface SPI, Glare
    Cod.: NL013PN001WS
    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €11,50
    €10,30
    €9,70
    €9,50

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Disponibile
    €11,50 IVA esclusa
    i h

    DESCRIPTION

     

    Graphic COG with PCB OLED module, which is made of resolution 128x64 pixels, diagonal size 1.28 inch. It is built in with SH1106G IC; it supports SPI interface, 1/64 driving duty. This model has PCB outline size 35.50 × 32.0 mm with mounting holes on board and 7x1 metal pins on module.

    The supply voltage for logic is 3V/ 5V, supply voltage for display is 7.5V (Internal Boots), display with 50% check board current is [email protected] (typical value). Operating temperatures from -40℃ to +80℃; storage temperatures from -40℃ to +85℃.

     

    DRAWING

     

    SPECIFICATIONS

     

    Interface Pin Function

    No.SymbolFunction
    1 VCC Power supply input: 2.9 – 5.2V
    2 GND Ground
    3 SCL When the I2C interface is selected, then D0 serves as the serial clock input pad (SCL) and D1
    serves as the serial data input pad (SDAI). At this time, D2 to D7 are set to high impedance.
    4 SDA

     

    Mechanical Data

    ItemDimensionUnit
    Dot Matrix 128 × 64 Dots -
    Module dimension 35.50 × 32.00 × 2.66 mm
    Active Area 29.42 × 14.20 mm
    Pixel Size 0.205 × 0.197 mm
    Pixel Pitch 0.230 × 0.222 mm
    Display Mode Passive Matrix
    Display Color Monochrome
    Drive Duty 1/64 Duty
    Controller IC SH1106
    Interface I2C
    Size 1.28 inch

     

    Absolute Maximum Ratings

    ParameterSymbolMinMaxUnit
    Supply Voltage for Logic VCC 1.65 5.5 V
    Operating Temperature TOP -40 +80 °C
    Storage Temperature TSTG -40 +85 °C

     

    Electrical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Supply Voltage for Logic VCC - 2.9 3.3 5.2 V
    Input High Volt. VIH - 0.8×VCC - VCC V
    Input Low Volt. VIL - 0 - 0.2×VCC V
    Output High Volt. VOH - 0.9×VCC - VCC V
    Output Low Volt. VOL - 0 - 0.1×VCC V
    50% Check Board operating Current   ICC VCC =3.3V - 25 37.5 mA

     

    Specifiche di prodotto
    Size 1.28"
    Resolution 128x64
    Active Area (mm) 29.42x14.20
    Dot Size 0.20x0.19
    Polarizer Glare
    Color White
    Power supply 3~5V
    Display Interface SPI
    Display IC SH1106G
    Constructive Structure COG + PCB
    Frame Yes
    Touch Panel No touch
    O. Temperature (°C) -40~80
    Data Connection Pin Strip
    Pin Nr. 7
    Pin Pitch 2.54mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni