Cerca
Italiano
Catalogo
    Menu Chiudi

    D-GMA31027A-0-Q

    TFT 1.54" 200x200, Monochrome, Reflective LCD + IC Controller, Interface MCU (SPI) IC ST7305, No Backlight, No touch
    Brand: Powertip
    Cod.: D-GMA31027A-0-Q

    Kit accessori

    Prezzi per quantità
    Quantità
    1+
    5+
    10+
    25+
    Prezzo
    €12,10
    €10,90
    €10,20
    €10,00

    Per quantità maggiori di 49pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

    Disponibilità: Il prodotto non può essere aggiunto al carrello. Prego verificare con FC la futura disponibilità
    €12,10 IVA esclusa
    i h

    DRAWING

     

    SPECIFICATIONS

    Interface Pin Description

    PinSymbolDescription
    1 VSS Ground
    2 VSS Ground
    3 NC Not Connect
    4 VDDA Power Supply (Analog)
    5 VDDA Power Supply (Analog)
    6 VDDI Power Supply (Digital)
    7 VDDI

    Power Supply (Digital)

    8 NC

    Not Connect

    9 CSB

    Chip select input pin.

    CSB="L": This chip is selected and the MPU interface is active.

    CSB="H": This chip is not selected and the MPU interface is disabled (D[7:0] are high impedance).

    10 A0

    A0="H": Indicates that D[7:0] are display data;

    A0="L": Indicates that D[7:0] are control data.

    11 RSTB Reset input pin
    12 SCLK Serial input clock
    13

    SDA

    Serial input / output data

    14 NC Not connect
    15 TE Tearing effect signal is used to synchronize MCU to frame memroy writing. If not used, please let this pin open.
    16 EXTB

    EXTB="L": Enable the extension operation mode.

    When programming MTP, connect EXTB to VD GND externally.

    This pin has an internal pull-high resistor. Please leave this pin OPEN ater special operation.

    17 VPP

    The programming power supply of the built-in NVM. Apply external power 7.5V here when programming (> 8mA for successful programming).

    If not used, left this pin open.

    18 NC Not Connect
    19 VSS Ground
    20 VSS Ground

     

    General Specification

    ItemStandard Value
    Display Type 200 x 200 Dots
    Module dimension 29.46(W) × 31.71(L) × 0.76(H)
    Active Area 27.66(W) × 27.66(L)
    LCD Type a-Si TFT, Normally White, Reflection
    Screen size (inch) 1.54 inch
    Viewing Direction 6 O'clock
    Color Configuration Mono
    Weight 1.5g
    Interface 4-line serial interface
    Driver IC ST7305
    ROHS This product conforms the RoHS of PTC

     

    Absolute Maximum Ratings

    ParameterSymbolConditionMinMaxUnit
    Power Supply Voltage VDDA - -0.3 +4.0 V
    Power Supply Voltage VDDI   -0.3 +4.0 V
    Input Voltage VIN - -0.3 VDDI+0.5 V
    Operating Temperature TOP (Ts) Note 1 -20 70 °C
    Storage Temperature TST (Ta) Note 2 -30 80 °C
    Storage Humidity HD Ta<60°C 20 90 %RH

    Note 1: Ts is the temperature of panel's surface.

    Note 2: Ta is the ambient temperature of samples.

     

    Electronical Characteristics

    ItemSymbolConditionMinTypMaxUnit
    Analog Power Supply (Normal Mode) VDDA - 3.0 3.3 3.6 V
    Digital Power Supply (Normal Mode) VDDI - 3.0 3.3 3.6 V
    "H" Input Voltage VIH - 0.7VDDI - VDDI V
    "L" Input Voltage VIL - VSS - 0.3VDDI V
    Output High voltage VOH IOH=-0.5mA 0.8VDDI - VDDI V
    Output Low voltage VOL IOL=-0.5mA VSS - 0.2VDDI V
    Supply Current IVDDI

    VDDI=3.3V:

    Pattern=text

    - 13 - uA 
    IVDDA

    VDDA=3.3V:

    Pattern=horizontal line*1

      65 100 uA

    Note: *1 The Maximum current display

    Specifiche di prodotto
    Size 1.54"
    Resolution 200x200
    Active Area (mm) 27.66x27.66
    Color Monochrome
    Display Interface MCU (SPI)
    Display IC ST7305
    View Angle TN
    Frame No
    Touch Panel No touch
    O. Temperature (°C) -20~70
    Data Connection FPC for ZIF Connector
    Pin Nr. 20
    Pin Pitch 0.5mm
    Preferred - Not Preferred Preferred
    *
    *
    *
    *
    Solo gli utenti registrati possono scrivere recensioni