Search
Filters
Close

WF18-128160GD#0011-FC

TFT 1.77" 128x160 Portrait LCD Panel, Interface MCU (SPI) IC ST7735S, 400cd/m², Capacitive touch panel I2C interface (GF, IC FT6336U)

DESCRIPTION

WF18-128160GD#0011-FC is a 1.77-inch TFT display module with a resolution of 128x160 pixels. This micro LCD module is built in with ST7735S IC, supporting serial 3-line/4-line SPI interfaces. It has the module dimension of 36.50 x 47.00 mm and the active area of 28.03 x 35.04 mm. The supply voltage of the display ranges from 2.5V to 3.7V, and the typical value is 2.75V.

WF18-128160GD#0011-FC is a portrait mode micro TFT display. Users can change it from portrait mode to landscape mode through software settings. The contrast ratio of the module is 500:1 (typical value), and its brightness is 400 nits (typical value). The operating temperatures are from -20℃ to +70℃, and the storage temperatures range from -30℃ to +80℃.

 

DRAWING

Micro TFT Display, LCD Display Module - WF18GTLAADNN0

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolI/OFunction
1 LED+ P Back light anode
2 LED- P Back light cathode
3 SPI4W
(VCC=4 WIRE)
I - SPI4W='0', 3-line SPI Enable.
- SPI4W='1', 4-line SPI Enable.
4 VCC P Power Supply.
5 GND P Ground
6 CS I Chip enable (CSX)
7 RST I Reset signal (RESX)
8 SDA I/O Serial input/output signal in serial interface mode.
9 SCL I In Serial Interface, this is used as SCL.
10 D/C I Data/ command selection. (D/CX)

 

LCM PIN Definition

PinSymbolFunction
1 VSS Ground for analog circuit
2 VDDT Power Supply: + 3.3V
3 SCL I2C clock input
4 SDA I2C data input and output
5 /RST External reset signal, active low
6 /INT External interrupt to the host

 

General Specifications

ItemDimensionUnit
Size 1.77 inch
Dot Matrix 128 × RGB × 160(TFT) dots
Module dimension 36.50(W) × 47.00(H) × 4.27(D) mm
Active area 28.03 × 35.04 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Portrait
IC ST7735S or Equivalent
Interface SPI
CTP IC FT6336U or equivalent
CTP FW Version 0x02
CTP Resolution 128*160
Backlight Type LED, Normally White
Wth/Without TP With CTP
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Analog VCI 2.5 2.75 3.7 V
Supply LCM current ICI(mA) 0.9 2 mA
Supply Voltage For Touch VDDT - 2.8 - 3.3 V
SKU: WF18-128160GD#0011-FC
Brand: Winstar
Available: Yes
Accessory Kit
Price Breaks
Quantity
1+
5+
10+
25+
Price
€19.90
€14.60
€12.40
€12.00

For quantities above 25 pcs pls send your enquiry to [email protected] or call +39 0332 1888005

€19.90 excl tax

DESCRIPTION

WF18-128160GD#0011-FC is a 1.77-inch TFT display module with a resolution of 128x160 pixels. This micro LCD module is built in with ST7735S IC, supporting serial 3-line/4-line SPI interfaces. It has the module dimension of 36.50 x 47.00 mm and the active area of 28.03 x 35.04 mm. The supply voltage of the display ranges from 2.5V to 3.7V, and the typical value is 2.75V.

WF18-128160GD#0011-FC is a portrait mode micro TFT display. Users can change it from portrait mode to landscape mode through software settings. The contrast ratio of the module is 500:1 (typical value), and its brightness is 400 nits (typical value). The operating temperatures are from -20℃ to +70℃, and the storage temperatures range from -30℃ to +80℃.

 

DRAWING

Micro TFT Display, LCD Display Module - WF18GTLAADNN0

SPECIFICATIONS

Interface

LCM PIN Definition

PinSymbolI/OFunction
1 LED+ P Back light anode
2 LED- P Back light cathode
3 SPI4W
(VCC=4 WIRE)
I - SPI4W='0', 3-line SPI Enable.
- SPI4W='1', 4-line SPI Enable.
4 VCC P Power Supply.
5 GND P Ground
6 CS I Chip enable (CSX)
7 RST I Reset signal (RESX)
8 SDA I/O Serial input/output signal in serial interface mode.
9 SCL I In Serial Interface, this is used as SCL.
10 D/C I Data/ command selection. (D/CX)

 

LCM PIN Definition

PinSymbolFunction
1 VSS Ground for analog circuit
2 VDDT Power Supply: + 3.3V
3 SCL I2C clock input
4 SDA I2C data input and output
5 /RST External reset signal, active low
6 /INT External interrupt to the host

 

General Specifications

ItemDimensionUnit
Size 1.77 inch
Dot Matrix 128 × RGB × 160(TFT) dots
Module dimension 36.50(W) × 47.00(H) × 4.27(D) mm
Active area 28.03 × 35.04 mm
Dot pitch 0.073 × 0.219 mm
LCD type TFT, Normally White, Transmissive
View Direction 6 o'clock
Gray Scale Inversion Direction 12 o'clock
Aspect Ratio Portrait
IC ST7735S or Equivalent
Interface SPI
CTP IC FT6336U or equivalent
CTP FW Version 0x02
CTP Resolution 128*160
Backlight Type LED, Normally White
Wth/Without TP With CTP
Surface Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 +70
Storage Temperature TST -30 +80

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For Analog VCI 2.5 2.75 3.7 V
Supply LCM current ICI(mA) 0.9 2 mA
Supply Voltage For Touch VDDT - 2.8 - 3.3 V
Products specifications
Brand Winstar
Size 1.77"
Resolution 128x160
Active Area (mm) 28.03x35.04
Color Full Color
Display Interface MCU (SPI)
Display IC ST7735S
View Angle TN
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~70
Display Connection FPC for ZIF Connector
Pin Nr. 10
Pin Pitch 0.5mm
Touch Panel IC Controller FT6336U
Preferred - Not Preferred Preferred
Download
Products specifications
Brand Winstar
Size 1.77"
Resolution 128x160
Active Area (mm) 28.03x35.04
Color Full Color
Display Interface MCU (SPI)
Display IC ST7735S
View Angle TN
Frame No
Touch Panel Capacitive
O. Temperature (°C) -20~70
Display Connection FPC for ZIF Connector
Pin Nr. 10
Pin Pitch 0.5mm
Touch Panel IC Controller FT6336U
Preferred - Not Preferred Preferred