Menu
Cerca
Filters
Close
Menu

WF102-800480QD#000-FC

Immagine di WF102-800480QD#000-FC Immagine di WF102-800480QD#000-FC
TFT 10.2" 800x480, LCD + IC Controller, Interface MCU (Parallel) IC SSD1963 (8/16bit), 350cd/m², No touch

DESCRIPTION

 

This 10.2 inch is the WF102A extended model which is built in with SSD1963 controller board plus a 36 pin-out connector on board. This model is available in 8080 family MPU 8bit/16bit options and already defined pin no. 33 ~ 36 as backlight supply; so there is no need to design extra backlight circuit. This display is with the module dimension of 235.0 x 145.0mm and AA size of 222 x 132.48 mm.

 

DRAWING

 

 

 

SPECIFICATIONS

 

Interface

PinSymbolFunction
1 GND System ground pin of the IC . Connect to system ground.
2 VDD Power Supply : +3.3V
3 BLE Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RST Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; ; Default U/D=L
29~32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

 

General Specifications

ItemDimensionUnit
Size 10.2 inch
Dot Matrix 800 × RGB × 480 dots
Module dimension 235.0(H) × 145.0(V) × 10.2D) mm
Active area 222.0(W) × 132.48(H) mm
Dot pitch 0.0925(W) × 0.276(H) mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Panel Without touch panel
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD － 3.0 3.1 3.3 V
Supply Current For LCM IDD － － 160 225 mA
SKU: WF102-800480QD#000-FC
Brand: Winstar
Disponibile: No
Si tratta dela prima recensione per questo prodotto
Kit Accessori
Prezzi per quantità
Quantità
1+
5+
10+
Prezzo
€99,60
€89,60
€73,60

Per quantita’ maggiori di 25pz prego invii la richiesta a [email protected] o chiami il +39 0332 1888005

€99,60 IVA esclusa

DESCRIPTION

 

This 10.2 inch is the WF102A extended model which is built in with SSD1963 controller board plus a 36 pin-out connector on board. This model is available in 8080 family MPU 8bit/16bit options and already defined pin no. 33 ~ 36 as backlight supply; so there is no need to design extra backlight circuit. This display is with the module dimension of 235.0 x 145.0mm and AA size of 222 x 132.48 mm.

 

DRAWING

 

 

 

SPECIFICATIONS

 

Interface

PinSymbolFunction
1 GND System ground pin of the IC . Connect to system ground.
2 VDD Power Supply : +3.3V
3 BLE Backlight control signal , H: On \ L: Off
4 D/C Data/Command select
5 WR Write strobe signal
6 RD Read strobe signal
7~14 DB0~DB7 Data bus
15~22 DB8~DB15 Data bus (When select 8bits Mode, this pin is NC)
23~24 NC No connect
25 CS Chip select
26 RST Hardware reset
27 L/R Left / right selection; Default L/R=H
28 U/D Up/down selection; ; Default U/D=L
29~32 NC No connect
33~34 VLED- Power for LED Driver IC(GND)
35~36 VLED+ Power for LED Driver IC(+5V)

 

General Specifications

ItemDimensionUnit
Size 10.2 inch
Dot Matrix 800 × RGB × 480 dots
Module dimension 235.0(H) × 145.0(V) × 10.2D) mm
Active area 222.0(W) × 132.48(H) mm
Dot pitch 0.0925(W) × 0.276(H) mm
LCD type TFT, Normally White, Transmissive
View Direction 12 o'clock
Gray Scale Inversion Direction 6 o'clock
Backlight Type LED, Normally White
Controller IC SSD1963
Interface Digital 8080 family MPU 8bit/16bit
Touch Panel Without touch panel
Surface Anti-Glare

 

Absolute Maximum Ratings

ItemSymbolMinTypMaxUnit
Operating Temperature TOP -20 － +70 ℃
Storage Temperature TST -30 － +80 ℃

 

Electrical Characteristics

ItemSymbolConditionMinTypMaxUnit
Supply Voltage For LCM VDD － 3.0 3.1 3.3 V
Supply Current For LCM IDD － － 160 225 mA
Specifiche di prodotto
Brand Winstar
Size 10.2"
Risoluzione 800x480
Area Attiva (mm) 222.00x132.48
Colore Full Color
Interfaccia Display MCU (Parallel)
Display IC SSD1963
Angolo Visione TN
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display ZIF Connector
Nr. Pin 36
Passo Pin 0.5mm
Preferred - Not Preferred Not Preferred
Download
Specifiche di prodotto
Brand Winstar
Size 10.2"
Risoluzione 800x480
Area Attiva (mm) 222.00x132.48
Colore Full Color
Interfaccia Display MCU (Parallel)
Display IC SSD1963
Angolo Visione TN
Frame No
Touch Panel No touch
Temperatura O. (°C) -20~70
Connessione Display ZIF Connector
Nr. Pin 36
Passo Pin 0.5mm
Preferred - Not Preferred Not Preferred
Prodotti correlati
Immagine di SML2CD36X92BDX6BL-P0.5-S4

SML2CD36X92BDX6BL-P0.5-S4

FFC Cable 36 pins, 0.5mm pitch, 100mm length, Same side
Da €3,40 IVA esclusa
Immagine di MOLEX_54104-3633

MOLEX_54104-3633

ZIF Connector 36 pins, 0.5mm pitch, Top contact
Da €1,90 IVA esclusa
Immagine di MOLEX_54132-3633

MOLEX_54132-3633

ZIF Connector 36 pins, 0.5mm pitch, Bottom contact
Da €1,80 IVA esclusa
Immagine di WWPIC24F-A-00#102Q-RTP

WWPIC24F-A-00#102Q-RTP

Evaluation kit for TFT WF102Q MCU Panel + RTP. The kit includes: CPU PIC24 + FFC cable 36pins + Power adapter 5V 2A (LCD module NOT included)
€58,00 IVA esclusa
Categorie
Ultimi prodotti visti
Contatti
  • +39 0332 1888005
  • +39 0332 320856
  • Via 2 Giugno, 20 – 21022 Azzate (VA) Italy
  • Partita IVA IT02764420127
    REA di Varese 285686
    Cap.sociale interamente versato 100.000€
Informazioni
Prodotti in Vetrina
Copyright © 2025 FIRST Components. Tutti i diritti riservati
Powered by nopCommerce
Developed by Weblink
FIRST Components s.r.l.
Via 2 Giugno, 20 – 21022 Azzate (VA) Italy